ข้อความทั้งหมด

Q: can I use 24v/ 9A ?

ถามโดย BG235101033 บน 2021-09-27 06:43:11

dougwoodrow Hi, yes that should be okay. This amplifier needs a power supply that has a voltage between 12 and 24 volts, and it will attempt to draw up to 5 amps of current depending on the type of speaker and the volume setting. So the voltage of the supply must not be higher than 24 volts, but it does not matter if the power supply is *capable* of providing more than the needed current, the amplifier will only draw what it needs. If the supply can only provide a *lower* current it will probably sound bad, because the amplifier will not be able to draw the current it needs.

2021-09-27 11:15:32 เป็นประโยชน์ (0)
เสนอ
คำตอบ (5)

Q: Can i feed this amp with a 12v 18A computer power supply without any problems ?

ถามโดย NURULLAH_SARI บน 2021-07-25 04:14:10

dougwoodrow Probably. But are you really sure it can deliver 18 amps? That is a LOT of current! In theory that shouldn't be a problem, the amplifier should only draw the current it needs. But if something goes wrong there is a danger the amplifier could try to draw too much current and 18 amps would be enough to destroy it.

2021-08-05 02:50:08 เป็นประโยชน์ (1)
เสนอ
คำตอบ (3)

dougwoodrow The barrel connector plug I'm using fits nicely. It has an outer diameter of 5.5mm and the inner spring inside the connector closes to 2.1mm and opens to 2.5mm. I suspect the pin inside the socket on the amplifier is 2.1mm in diameter.

2021-06-08 03:54:30 เป็นประโยชน์ (0)
เสนอ
คำตอบ (4)

Q: please tell me I use 19.5v 4.*****w any problem?

ถามโดย Soni บน 2021-04-19 07:48:34

dougwoodrow The specs say the amp will take up to 24V at 5A, so your PSU sounds well suited. So far I've only tested a 12V 1A PSU, it produces a perfectly decent volume into 4 ohm speakers in an average size room.

2021-04-20 04:23:02 เป็นประโยชน์ (1)
เสนอ
คำตอบ (5)

Q: Would it stop the head from dropping forwards when sleeping?

ถามโดย dougwoodrow บน 2021-03-08 03:18:41

BG394743511 PLEASE CONTACT TO THE COSTUMER SERVICE

2021-03-26 09:08:49 เป็นประโยชน์ (0)
เสนอ
คำตอบ (2)

dougwoodrow 1) Go to the Android Play Store, search for "oximeter-h" app, and install it. 2) Turn on Bluetooth on your phone 3) Stick your finger in the the oximeter 4) Run the Oximeter-h app, and connect to the oximeter device (mine was called "J2")

2021-02-25 09:03:10 เป็นประโยชน์ (1)
เสนอ
คำตอบ (1)

Q: Is not measuring negative celcius degrees? Only for indoor use?

ถามโดย panosgat บน 2020-12-20 01:49:46

dougwoodrow I've had one inside my kitchen freezer for a week now, and the recorded temperature has fluctuated between -16 and -21 degrees Celsius, so I think it works well below freezing. Update: After 8 days in the freezer at -19C it stopped communicating. Took the battery out and it started up again fine when battery re-inserted.

2021-01-01 03:29:18 เป็นประโยชน์ (8)
เสนอ
คำตอบ (15)

dougwoodrow Sayingsomething "didn't work" is not very helpful. Do you mean when you plugged it into your Windows 10 computer the device was not recognised at all?

patriciarichardlewis 11/12/2020
2
ความคิดเห็น (2)