BorisArt
Q: How can I connect the LED: to which powersource, do I need a driver, do I need a heatsink?
Soran BorisArt Açık 2019-01-06 09:00:42
Q: Hi, how can I change the ringtones?
Soran BorisArt Açık 2020-01-27 09:47:49
Mondegreen Can't change
2020-02-05 01:11:01 Yararlı (0)
Q: Hi, it seems the camera can rotate while sliding? If so, what is the closest center point?
Soran BorisArt Açık 2019-12-25 04:51:04
Galvez no
2020-01-06 03:09:12 Yararlı (0)Q: How many devices can be connected at a time?
Soran itsjohnmartin Açık 2018-08-26 10:31:18
BorisArt Only1
2019-09-11 10:16:48 Yararlı (0)
BorisArt Sorry,I have not
2019-09-11 10:16:23 Yararlı (0)Q: Could you let me know the power of each laser? Thanks.
Soran BorisArt Açık 2019-09-09 10:19:25
Bepi Didn't know precisely but I think it was a "standard" 3-5mW unit, same as level's pointer-tracer.
2019-09-09 07:55:20 Yararlı (0)Q: Is his rig good for Nikon Z6, or do you have other?
Soran BorisArt Açık 2019-07-25 10:21:06
Kowtowbox1234 support
2019-08-05 05:43:28 Yararlı (0)
Q: How can I connect the LED: to which powersource, do I need a driver, do I need a heatsink?
Soran BorisArt Açık 2019-01-10 03:40:10
Tritavus via the jumper
2019-01-24 08:12:28 Yararlı (1)Sizi Davet Yanıtı e-postasına abone olmaya içtenlikle davet ediyoruz!
Abone olursanız, sizi e-posta yoluyla insanların ürünlerle ilgili sorularını yanıtlamaya davet edeceğiz. Size abone olarak] ayrıca "Yararlı Rozeti " kazanacaksınız! Gizlilik ayarları sayfasından istediğiniz zaman aboneliğinizi iptal edebilirsiniz.
Başkalarına yardım edin ve daha mutlu olun!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
.JPG)
hsb3852 yes this led does require a heat sink. The base of the led is meant to be soldered onto a circular pad on a PCB that serves to conduct heat away. You need to drive it with a 700mA *constant-current* led driver. The voltage of the driver you choose depends on how many leds connected in series that you want to drive (you need approx. 3.4V per led in the string, e.g. for 3 leds the driver must be at least 10.5V at 700mA).
2019-06-02 02:22:52 Yararlı (2)