TWO TREES® Svart / Silver 2040 Y-axel Synkron remsträckare aluminiumprofil kit för 3D-skrivar delar Recensioner - Banggood Sverige Online Shopping

TWO TREES® Svart / Silver 2040 Y-axel Synkron remsträckare aluminiumprofil kit för 3D-skrivar delar

US$7.30
~~US$27.00~~
Köp nu

Recensioner

4.91 av5

Se alla11 recensioner

5 stjärna
10 (90.9%)
4 stjärna
1 (9.1%)
3 stjärna
0 (0%)
2 stjärna
0 (0%)
1 stjärna
0 (0%)

Skriva en recension Få dubbla granskningspoäng om du är en av de första 3 recensionerna publicerade!

Alla recensioner(11)
Bilder
Videoklipp
All Star
- All Star(11)
- 5 Stjärna(10)
- 4 Stjärna(1)
- 3 Stjärna(0)
- 2 Stjärna(0)
- 1 Stjärna(0)

Sortera efter:

Topp granskning

Topp granskning
Mest hjälpsam
Senaste

Recensioner endast från ditt land (United States)

|

Visa original

En del av recensionen har översatts automatiskt.

top_171VIP3
BR
23/06/2021

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.
0

kommentarer

Visa original
BG574810573VIP3
GB
27/10/2020

cannot fault works easy to install

cannot fault works easy to install

cannot fault works easy to install
0

kommentarer

Visa original
Hamza KosmaVIP1
TR
01/06/2021

ürün kaliteli ve işlevsel, tavsiye ederim.

ürün kaliteli ve işlevsel, tavsiye ederim.

ürün kaliteli ve işlevsel, tavsiye ederim.
0

kommentarer

Visa original
AndiMVIP5
DE
10/02/2021

Good product for a litte fortune.

Good product for a litte fortune.

Good product for a litte fortune.
0

kommentarer

Visa original
dpepereVIP3
CA
06/11/2020

tel que décrit

tel que décrit

tel que décrit
0

kommentarer

Visa original
dario
AE
04/11/2020

Good quality, thanks

Good quality, thanks

Good quality, thanks
0

kommentarer

Visa original
KevinMcD1386VIP2
US
27/10/2020

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back
0

kommentarer

Visa original
MarkusVIP3
CH
01/02/2020

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).
0

kommentarer

Visa original
nukefield_XIIIVIP3
US
07/11/2019

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........
0

kommentarer

Visa original
TeamGaviraVIP1
ES
25/06/2019

todo llego bien

todo llego bien

todo llego bien
0

kommentarer

Visa original

Show:

Total 0 sidor

Gå till sidan

Gå

Du kanske är intresserad av

recommendation for you