Used it for the RC conversion of the 48cm glider (ID: 1310581). Used this ESC: VGOOD 6A 2S 32-Bit Brushless ESC With 1.5A SBEC (ID: 1422424) and these props: Gemfan 6030 6x3 Direct Drive Propeller (ID: 982379). It is working well on a 2S 300mAh Lipo. The plane weights 100g (all together with servos and Lipo). It could have a bit more power. But it is enough to fly. I like the motor mount, which made it easy to mount the motor into the plane. I heated the mount and "melted" it into the EPP foam. Then I used some servo screws and UHU Por to glue the mount. It is very stable but still flexible. Unfortunately the cable of the motor is not really good. It ripped out, so I had to order a new one :-(

Used it for the RC conversion of the 48cm glider (ID: 1310581). Used this ESC: VGOOD 6A 2S 32-Bit Brushless ESC With 1.5A SBEC (ID: 1422424) and these props: Gemfan 6030 6x3 Direct Drive Propeller (ID: 982379). It is working well on a 2S 300mAh Lipo. The plane weights 100g (all together with servos and Lipo). It could have a bit more power. But it is enough to fly. I like the motor mount, which made it easy to mount the motor into the plane. I heated the mount and "melted" it into the EPP foam. Then I used some servo screws and UHU Por to glue the mount. It is very stable but still flexible. Unfortunately the cable of the motor is not really good. It ripped out, so I had to order a new one :-(

Used it for the RC conversion of the 48cm glider (ID: 1310581). Used this ESC: VGOOD 6A 2S 32-Bit Brushless ESC With 1.5A SBEC (ID: 1422424) and these props: Gemfan 6030 6x3 Direct Drive Propeller (ID: 982379). It is working well on a 2S 300mAh Lipo. The plane weights 100g (all together with servos and Lipo). It could have a bit more power. But it is enough to fly. I like the motor mount, which made it easy to mount the motor into the plane. I heated the mount and "melted" it into the EPP foam. Then I used some servo screws and UHU Por to glue the mount. It is very stable but still flexible. Unfortunately the cable of the motor is not really good. It ripped out, so I had to order a new one :-(

fonctionne parfaitement en 3s (pas de chauffe moteur) avec une hélice 5.5x3.3 pour un planeur de 184g

fonctionne parfaitement en 3s (pas de chauffe moteur) avec une hélice 5.5x3.3 pour un planeur de 184g

fonctionne parfaitement en 3s (pas de chauffe moteur) avec une hélice 5.5x3.3 pour un planeur de 184g