Recenzie Machifit MGN12H Lineárny Súčelný Blok 12mm oceľové ložisko pre CNC Stroje Presnosť Odolná Konštrukcia - Banggood Slovenská online nakupovanie

:

Download the

Banggood App

Stiahnite si aplikáciu a získajte

3 USD zľavový kupón

Doručenie do:

Jazyk:

Mena:

Ahoj Prihlásiť sa Pripojte sa
Prihlásiť sa Pripoj sa k nám
Nový zákazník? Tu začnite.
0

Machifit MGN12H Lineárny Súčelný Blok 12mm oceľové ložisko pre CNC Stroje Presnosť Odolná Konštrukcia

US$7.99
~~US$15.99~~
Kúpte teraz

Hodnotenia zákazníkov

4.85 z 5

Zobraziť všetky recenzie 522

5 hviezda
483 (92.5%)
4 hviezda
19 (3.6%)
3 hviezda
8 (1.5%)
2 hviezda
5 (1.0%)
1 hviezda
7 (1.3%)

Napísať recenziu Získajte body za dvojitú kontrolu, ak ste jednou z prvých 3 zverejnených recenzií!

Všetky recenzie (522)
Obrázok (47)
Video (0)
Všetky hviezda
- Všetky hviezda(522)
- 5 hviezda(483)
- 4 hviezda(19)
- 3 hviezda(8)
- 2 hviezda(5)
- 1 hviezda(7)

Triediť podľa:

Najlepšie hodnotenie

Najlepšie hodnotenie
Najužitočnejšie
Najnovšie

Recenzie iba z vašej krajiny (United States)

|

Zobraziť originál

Časť recenzie bola preložená automaticky.

migiVIP5
SK
06/03/2021

I bought a lot of these cariages to build cnc. They need a little bit of tuning to move smoothly. If you buy a complet, linear rail and carriage, they will work probably good. Due to a small differences in widths between various rails and a various diameters of balls, they can struggle a little bit. But you can find a lot of videos on youtube how to improve them. Original balls diameter is 2,381mm, but I found them in range of 2,36 to 2,42mm. Anyway, the body looks good so if you devote a little bit of effort they will run smoothly

I bought a lot of these cariages to build cnc. They need a little bit of tuning to move smoothly. If you buy a complet, linear rail and carriage, they will work probably good. Due to a small differences in widths between various rails and a various diameters of balls, they can struggle a little bit. But you can find a lot of videos on youtube how to improve them. Original balls diameter is 2,381mm, but I found them in range of 2,36 to 2,42mm. Anyway, the body looks good so if you devote a little bit of effort they will run smoothly

I bought a lot of these cariages to build cnc. They need a little bit of tuning to move smoothly. If you buy a complet, linear rail and carriage, they will work probably good. Due to a small differences in widths between various rails and a various diameters of balls, they can struggle a little bit. But you can find a lot of videos on youtube how to improve them. Original balls diameter is 2,381mm, but I found them in range of 2,36 to 2,42mm. Anyway, the body looks good so if you devote a little bit of effort they will run smoothly
5

Pripomienky

Zobraziť originál
MaurodelGaudio
IT
12/06/2018

Ottimo prodotto.

Ottimo prodotto.

Ottimo prodotto.
1

Pripomienky

Zobraziť originál

Show:

Celkom 0 strán

Chod na stranu

Choď

Mohlo by vás zaujímať

recommendation for you