Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

This is an awesome little receiver. Strangely this is already the second one I received which smells very bad, like burnt, but it does work flawlessly. If you have the latest firmware on your Flysky Noble, this receiver will not work and you will have to update it. Update is not that easy, you will have to do "forced update", you will find the explanations on Flysky website. The receiver comes without manual, simply in a plastic bag. For updating you will have to download some files from flysky website, other software to open it, and you will have to connect your Noble to the computer. Use antistatic wrist band when trying to remove the plugs of the receiver by soldering, or check for correct clothes. I did already destroy a Flysky GMR rx because I did not take care for statics...

This is an awesome little receiver. Strangely this is already the second one I received which smells very bad, like burnt, but it does work flawlessly. If you have the latest firmware on your Flysky Noble, this receiver will not work and you will have to update it. Update is not that easy, you will have to do "forced update", you will find the explanations on Flysky website. The receiver comes without manual, simply in a plastic bag. For updating you will have to download some files from flysky website, other software to open it, and you will have to connect your Noble to the computer. Use antistatic wrist band when trying to remove the plugs of the receiver by soldering, or check for correct clothes. I did already destroy a Flysky GMR rx because I did not take care for statics...

This is an awesome little receiver. Strangely this is already the second one I received which smells very bad, like burnt, but it does work flawlessly. If you have the latest firmware on your Flysky Noble, this receiver will not work and you will have to update it. Update is not that easy, you will have to do "forced update", you will find the explanations on Flysky website. The receiver comes without manual, simply in a plastic bag. For updating you will have to download some files from flysky website, other software to open it, and you will have to connect your Noble to the computer. Use antistatic wrist band when trying to remove the plugs of the receiver by soldering, or check for correct clothes. I did already destroy a Flysky GMR rx because I did not take care for statics...

I have five more and is the perfect fit for the 1/24-1/28 scale car drifters. Is really compact and performs well. Shipping like always with Banggood, faster than expected.

I have five more and is the perfect fit for the 1/24-1/28 scale car drifters. Is really compact and performs well. Shipping like always with Banggood, faster than expected.

I have five more and is the perfect fit for the 1/24-1/28 scale car drifters. Is really compact and performs well. Shipping like always with Banggood, faster than expected.

it works great and the best is that is perfect size for 1/28 scale car

it works great and the best is that is perfect size for 1/28 scale car

it works great and the best is that is perfect size for 1/28 scale car

Very small, the signal resolution is clear, but the concentration is less 54%

Very small, the signal resolution is clear, but the concentration is less 54%

Very small, the signal resolution is clear, but the concentration is less 54%

Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

Perfect. Works flawlessly. Comes with JST ZH 1.5 mm plugs. Check the polarity of your servos, if you do have micro-servos with those plugs - micro flybarless systems for helis (Microbrain, Microvortex, Microspirit) do also use JST ZH plugs, but they use different polarity, ground is in center. You have to change polarity of those plugs before you use it with this receiver, otherwise you can destroy the servo! Good quality, tiny, bind button, plug for a (futue?) gyro. Very satisfied!

Awesome little receiver. Check the update-video in the video section!

Awesome little receiver. Check the update-video in the video section!

Awesome little receiver. Check the update-video in the video section!

Love those tiny little receivers for my micros.

Love those tiny little receivers for my micros.

Love those tiny little receivers for my micros.

Awesome little receivers. Need firmware update before first use with actual firmware Noble. No instructions at all...

Awesome little receivers. Need firmware update before first use with actual firmware Noble. No instructions at all...

Awesome little receivers. Need firmware update before first use with actual firmware Noble. No instructions at all...

super kleiner Empfänger, Firmware Update hat ohne Probleme funktioniert!

super kleiner Empfänger, Firmware Update hat ohne Probleme funktioniert!

super kleiner Empfänger, Firmware Update hat ohne Probleme funktioniert!