Received in good order and well packed as per photos. The packing provides a good means of storing the items. It is substantial and feels a quality piece of kit. It fits extremely easily onto the track square and is extremely accurate. It has a simple use and performs that task effectively. The item received a very good review on "China Tools" and on the basis of my experience well justifies it. For repeatable cuts and for any accurate cut this is an absolute bargain. I unreservedly recommend this product.

Received in good order and well packed as per photos. The packing provides a good means of storing the items. It is substantial and feels a quality piece of kit. It fits extremely easily onto the track square and is extremely accurate. It has a simple use and performs that task effectively. The item received a very good review on "China Tools" and on the basis of my experience well justifies it. For repeatable cuts and for any accurate cut this is an absolute bargain. I unreservedly recommend this product.

Received in good order and well packed as per photos. The packing provides a good means of storing the items. It is substantial and feels a quality piece of kit. It fits extremely easily onto the track square and is extremely accurate. It has a simple use and performs that task effectively. The item received a very good review on "China Tools" and on the basis of my experience well justifies it. For repeatable cuts and for any accurate cut this is an absolute bargain. I unreservedly recommend this product.

Very good quality and very good precision and accuracy once dialled in correctly. It is a shame the minimum cut is 20cm but still good enough. The only negative, is, no setup guide and whilst it looks intuitive enough, mistakes can be easily made with screws / bolts orientation. For repeatable cuts, used in conjunction with 90 degree angle guide (as shown in photos) and Makita rail; this offers very good precision and accuracy. Totally recommended

Very good quality and very good precision and accuracy once dialled in correctly. It is a shame the minimum cut is 20cm but still good enough. The only negative, is, no setup guide and whilst it looks intuitive enough, mistakes can be easily made with screws / bolts orientation. For repeatable cuts, used in conjunction with 90 degree angle guide (as shown in photos) and Makita rail; this offers very good precision and accuracy. Totally recommended

Very good quality and very good precision and accuracy once dialled in correctly. It is a shame the minimum cut is 20cm but still good enough. The only negative, is, no setup guide and whilst it looks intuitive enough, mistakes can be easily made with screws / bolts orientation. For repeatable cuts, used in conjunction with 90 degree angle guide (as shown in photos) and Makita rail; this offers very good precision and accuracy. Totally recommended

It's worth the price, works really well to make consistent repeatable cut, I install it in my makita track saw. Things I dislike is the knurled knob, I've changed it to better one since it's too small and uncomfortable to tighten or loosen. The scale also not that good because it's etched on the groove so there's a possibility of parallax mistake when read it. I add sticky 13mm scale for better reading and better contrast too. Things I like, it's straight forward. Easy to use, easy to install, and easy to calibrate. More importantly it's accurate and square. For the price I'll give it 5 stars

It's worth the price, works really well to make consistent repeatable cut, I install it in my makita track saw. Things I dislike is the knurled knob, I've changed it to better one since it's too small and uncomfortable to tighten or loosen. The scale also not that good because it's etched on the groove so there's a possibility of parallax mistake when read it. I add sticky 13mm scale for better reading and better contrast too. Things I like, it's straight forward. Easy to use, easy to install, and easy to calibrate. More importantly it's accurate and square. For the price I'll give it 5 stars

It's worth the price, works really well to make consistent repeatable cut, I install it in my makita track saw. Things I dislike is the knurled knob, I've changed it to better one since it's too small and uncomfortable to tighten or loosen. The scale also not that good because it's etched on the groove so there's a possibility of parallax mistake when read it. I add sticky 13mm scale for better reading and better contrast too. Things I like, it's straight forward. Easy to use, easy to install, and easy to calibrate. More importantly it's accurate and square. For the price I'll give it 5 stars

This tool is as good as Dennis of Hooked On Wood describes. He did make a mistake with how he joined the two main lengths - he screwed the two special screws "up-side-down" into the joiner. Doing it the right way makes the joint properly secure. Dennis showed the assembly to be a bit unstable when the two guide extensions are attached to the Fonson square and track. I fixed this (see attached photos) with a 70mm x 47mm x1.6mm piece of aluminium secured by two M5 screws placed 10mm from each end and 10mm from one edge. These went into two rectangular nuts (12mm x 18mm x 4.5mm) slid into the slot under the extension.

This tool is as good as Dennis of Hooked On Wood describes. He did make a mistake with how he joined the two main lengths - he screwed the two special screws "up-side-down" into the joiner. Doing it the right way makes the joint properly secure. Dennis showed the assembly to be a bit unstable when the two guide extensions are attached to the Fonson square and track. I fixed this (see attached photos) with a 70mm x 47mm x1.6mm piece of aluminium secured by two M5 screws placed 10mm from each end and 10mm from one edge. These went into two rectangular nuts (12mm x 18mm x 4.5mm) slid into the slot under the extension.

This tool is as good as Dennis of Hooked On Wood describes. He did make a mistake with how he joined the two main lengths - he screwed the two special screws "up-side-down" into the joiner. Doing it the right way makes the joint properly secure. Dennis showed the assembly to be a bit unstable when the two guide extensions are attached to the Fonson square and track. I fixed this (see attached photos) with a 70mm x 47mm x1.6mm piece of aluminium secured by two M5 screws placed 10mm from each end and 10mm from one edge. These went into two rectangular nuts (12mm x 18mm x 4.5mm) slid into the slot under the extension.

Great tool , possible to fit on a tso track with some tweaking. At this price , go for it.

Great tool , possible to fit on a tso track with some tweaking. At this price , go for it.

Great tool , possible to fit on a tso track with some tweaking. At this price , go for it.

Well packed. Fast shipping Very good workmanship and quality I recommend

Well packed. Fast shipping Very good workmanship and quality I recommend

Well packed. Fast shipping Very good workmanship and quality I recommend

These guide rods arrive as described and in a timely manner.

These guide rods arrive as described and in a timely manner.

These guide rods arrive as described and in a timely manner.

item received and meets my expectation. Good quality.

item received and meets my expectation. Good quality.

item received and meets my expectation. Good quality.

produto recebido em perfeitas condições e no prazo sugerido. recomendo

produto recebido em perfeitas condições e no prazo sugerido. recomendo

produto recebido em perfeitas condições e no prazo sugerido. recomendo

items received as described and in good packaging

items received as described and in good packaging

items received as described and in good packaging