Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Tolle Produkte empfehlen den Kauf

ótimos produtos recomendo comprar

Tolle Produkte empfehlen den Kauf

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

Ein guter Gewindebohrersatz. Ich habe mich darauf gefreut. Bisher habe ich nur die Größe M6x1.0 verwendet. Es hat einen perfekten Job gemacht.

A good threading drill kit. I was looking forward to it. So far I have only used the M6x1.0 size, yet. It did a perfectly good job.

Ein guter Gewindebohrersatz. Ich habe mich darauf gefreut. Bisher habe ich nur die Größe M6x1.0 verwendet. Es hat einen perfekten Job gemacht.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Bits sind großartig. Die Box, in der sie untergebracht sind, ist sehr intelligent und schützt die Bits gut. Ich kann sie nicht alle testen, aber die, die ich getestet habe, haben ihre Arbeit sehr gut gemacht!

Os Bits são ótimos. A caixa que os acomoda é bem inteligente e protege bem os bits. Não consigo testar todos, mas os que testei fizeram muito bem o seu trabalho!

Bits sind großartig. Die Box, in der sie untergebracht sind, ist sehr intelligent und schützt die Bits gut. Ich kann sie nicht alle testen, aber die, die ich getestet habe, haben ihre Arbeit sehr gut gemacht!

Perfekt! Wird meine Bohrer ergänzen.

Perfeito! Vai complementar minhas brocas.

Perfekt! Wird meine Bohrer ergänzen.

Vielen Dank für die Einreichung einer Bearbeitung. Ich habe es noch nicht probiert

Köszönöm szépen. Még nem próbáltam. Tetszik

Vielen Dank für die Einreichung einer Bearbeitung. Ich habe es noch nicht probiert

Anständige Qualität, empfehle ich.

Достойное качество, рекомендую.

Anständige Qualität, empfehle ich.

Es hat drei Wochen gedauert, die Qualität war normal.

дошло за три недели качество нормальное.

Es hat drei Wochen gedauert, die Qualität war normal.