Hodnotenia zákazníkov

Napísať recenziu
  • Všetky recenzie (671)
  • Obrázok (51)
  • Video (0)
  • Všetky hviezda
    • Všetky hviezda(671)
    • 5 hviezda(618)
    • 4 hviezda(34)
    • 3 hviezda(8)
    • 2 hviezda(6)
    • 1 hviezda(5)
Triediť podľa:
Najlepšie hodnotenie
  • Najlepšie hodnotenie
  • Najužitočnejšie
  • Najnovšie
Recenzie iba z vašej krajiny (United States)
Zobraziť originál

Časť recenzie bola preložená automaticky.

  • 09/01/2022

    I have purchased two of these clamps and received them before the estimated delivery date. The packaging is substantial and the clamps arrived undamaged. The clamps are well made and work as expected. They are a new twist on an old idea, the Holdfast which woodworkers have been using for a very long time, see photo. When using the clamp, to get full clamping pressure the clamp must be pushed down hard on the work piece with the cam lever in the reset position. If this is not done the cam has to take up any gap before exerting pressure on the work piece. When the cam exerts pressure on the work piece it causes the knurled shaft in the dog hole to press against the sides of the dog hole. This pressure is only at the top and bottom of the dog hole as the cam tries to rotate the clamp within the dog hole. The knurled shaft does not need to be knurled all the way round as it only bears on the dog hole where it is in line with the clamp arm. If the knurling was only where needed it would make fitting the clamp in the dog hole easier. If the clamp will damage the dog holes over extended use, only time will tell.

    Pripomienky (1)
    Zobraziť originál
  • 29/10/2021

    Package arrived in very good condition. The clamp is well protected in the foam and carton box. The solid piece of aluminium gives a good first impression. The lever which is acting as a cam for different pressure levels has a bit of friction with the pressure area. I put some PTFE and is ok. The cam is running perfectly parallel to the pressure plate which means pressure is well distributed. One of the 2 bolts is a bit proud of the pressure plate and it will mar the workpiece if in contact. It needs filing. This means taking the other 4 bolts off connecting the steel spring to the main body. The cross hatched pillar is sligtly bigger than 20mm (just shy of 20.1mm) as can be seen in the vernier reading. I guess it will need a bit of light sanding down.

    Pripomienky (3)
    Zobraziť originál
  • 19/04/2022

    Product came in well packaged in foam and well constructed with knurled stainless steel shaft (3-3/8” L) and anodized aluminum clamp body. Well suited for MFT type table with 19mm (3/4”) dog holes.

    Zobraziť originál
  • 08/03/2022

    Arrived within timeframe promised. Product well packaged with no shipping damage evident. Fit MFT table perfectly and worked right out of box. Product itself appears wee made.

    Zobraziť originál
  • 07/03/2022

    kargo çok hızlı geldi çok iyi paketlenmiş. Tahmin ettiğim gibi iyi tutuyor. uzun süre kullanıma uygun değil. alt yuvarlak parçanın alüminyum olması ve tek vidayla tutturulması ömrünün kısa olacağı anlamına geliyor. delikleri 20mm açtım ilk takışımda sıkıştı delikte kaldı çıkarırken vidadan sıyırdı. 20mm için deliklerin 20.3 mm delinmesi lazım. sıkarken boru üzerinden baskı yapıp sıkarsanız çok iyi sonuç alırsınız. uzun parçalar için dört tane gerekiyor yoksa gevşiyor. bu kaliteye göre biraz pahalı ama 5 yıldızı haketti.

    Zobraziť originál
  • 04/12/2021

    Grampo muito prático e resistente, ótimo para uso em bancadas com furos para fixação. Fabricado com excelente qualidade e totalmente em metal. chegou muito bem embalado, como pode ser visto na foto anexada. Prende as peças com boa pressão, garantindo que elas fiquem imobilizadas durante o trabalho. Apenas tome cuidado com o diâmetro do cilindro de fixação, pois são dois tamanhos diferentes, 19 e 20mm.

    Zobraziť originál
  • 27/04/2022

    This is the 3rd one I purchased. This is a perfect clamp for MFT style table thicker than 3/4” where track clamp will not fit. Clamping force is pretty significant at around 67 pound-force.

    Zobraziť originál
  • 02/12/2021

    This clamps are very well made and nice to handle. Proud owner of this quality product. Thanks Dennis from Hooked On Wood for his recommendation.

    Zobraziť originál
  • 22/11/2021

    Produto bem acabado. Robusto e macio de usar. Prende com firmeza. Muito bem acondicionado.

    Zobraziť originál
  • 21/11/2021

    Excellent dog clamps. Had a strong clamping power, easy to use and apply. Excellent quality.

    Zobraziť originál

    Celkom 0 strán

    Chod na stranu

    Mohlo by vás zaujímať

    recommendation for you
    • US$17.99
    • US$7.99
    • US$28.99
    • US$47.99
    • US$23.99
    • US$28.99
    • US$29.99
    • US$77.99
    • US$71.99
    • US$52.99
    • US$8.99
    • US$36.99
    • US$27.99
    • US$25.99
    • US$35.99
    • US$13.99
    • US$19.99
    • US$34.99