A friend of mine has the A8 as he had done all the research of which printer to get, yada yada. When I then looked into joining the 3D printing world, I of course leaned toward this printer too. I had an A8 marked for purchase when I came across this A8-M with it's upgrades and dual extruders for a little bit more money. After having it built and already doing the switch and other small upgrades, I can definitely say it's worth the money. I've not yet dared get the second extruder going at the same time, but I've printed several items from just one extruder through both Cura and Repetier (both of which were supplied on the memory card that came with the machine but I then downloaded the latest versions of). The lack of a cooling fan for the printed item is a little set back, but I'm going to be using a spare PC fan to get that resolved! Other than that, I've printed a different spool holder (the type that the spool sits on, with nice bearings to let it spin freely) and the thumb adjusters for levelling the plate. So, if you have a couple hundred £££ to spare and need a new hobby... this one is fun and, even with buying spools and other items, one of the least expensive ones I have!.

A friend of mine has the A8 as he had done all the research of which printer to get, yada yada. When I then looked into joining the 3D printing world, I of course leaned toward this printer too. I had an A8 marked for purchase when I came across this A8-M with it's upgrades and dual extruders for a little bit more money. After having it built and already doing the switch and other small upgrades, I can definitely say it's worth the money. I've not yet dared get the second extruder going at the same time, but I've printed several items from just one extruder through both Cura and Repetier (both of which were supplied on the memory card that came with the machine but I then downloaded the latest versions of). The lack of a cooling fan for the printed item is a little set back, but I'm going to be using a spare PC fan to get that resolved! Other than that, I've printed a different spool holder (the type that the spool sits on, with nice bearings to let it spin freely) and the thumb adjusters for levelling the plate. So, if you have a couple hundred £££ to spare and need a new hobby... this one is fun and, even with buying spools and other items, one of the least expensive ones I have!.

A friend of mine has the A8 as he had done all the research of which printer to get, yada yada. When I then looked into joining the 3D printing world, I of course leaned toward this printer too. I had an A8 marked for purchase when I came across this A8-M with it's upgrades and dual extruders for a little bit more money. After having it built and already doing the switch and other small upgrades, I can definitely say it's worth the money. I've not yet dared get the second extruder going at the same time, but I've printed several items from just one extruder through both Cura and Repetier (both of which were supplied on the memory card that came with the machine but I then downloaded the latest versions of). The lack of a cooling fan for the printed item is a little set back, but I'm going to be using a spare PC fan to get that resolved! Other than that, I've printed a different spool holder (the type that the spool sits on, with nice bearings to let it spin freely) and the thumb adjusters for levelling the plate. So, if you have a couple hundred £££ to spare and need a new hobby... this one is fun and, even with buying spools and other items, one of the least expensive ones I have!.

لقد جاء الكمال، والآن لركوب! 🤩🤩

Ha llegado perfecta, ahora a montar! 🤩🤩

لقد جاء الكمال، والآن لركوب! 🤩🤩

I had enough time only to test one extruder and I hope that I'll be able to test both really soon. So far, the only thing I think should be changed is the quality of installation guide. This is my first 3D Printer and it took me a lot of time to assemble this printer. Instructions which I had on the TF card were not enough and I had to look for other sources in the Internet. In my opinion, this guide could be prepared much better. There is my unboxing and testing video: https://youtu.be/__PQNh_P2og

I had enough time only to test one extruder and I hope that I'll be able to test both really soon. So far, the only thing I think should be changed is the quality of installation guide. This is my first 3D Printer and it took me a lot of time to assemble this printer. Instructions which I had on the TF card were not enough and I had to look for other sources in the Internet. In my opinion, this guide could be prepared much better. There is my unboxing and testing video: https://youtu.be/__PQNh_P2og

I had enough time only to test one extruder and I hope that I'll be able to test both really soon. So far, the only thing I think should be changed is the quality of installation guide. This is my first 3D Printer and it took me a lot of time to assemble this printer. Instructions which I had on the TF card were not enough and I had to look for other sources in the Internet. In my opinion, this guide could be prepared much better. There is my unboxing and testing video: https://youtu.be/__PQNh_P2og

The new 3D printer Anet A8-M is a great product. You can use it, to get a good result. It´s work fine. The price is good, too .

The new 3D printer Anet A8-M is a great product. You can use it, to get a good result. It´s work fine. The price is good, too .

The new 3D printer Anet A8-M is a great product. You can use it, to get a good result. It´s work fine. The price is good, too .

طابعة جيدة مع قاذف مزدوج

goede printer met dubbele extruder

طابعة جيدة مع قاذف مزدوج

شكراً جزيلاً. اشتريت طابعتين، واحدة من ترونكسي وهذه آنت أي 8. لقد عملت بشكل مثالي من الطبعة الأولى وأحتاج فقط إلى بعض التغييرات الطفيفة في الإعدادات مع كورا لكني أحب هذه الطابعة الصغيرة شكراً.

Thanks a lot. I bought two printers, one Tronxy and this Anet A8. It worked perfect from the first print and just need some minor changes in settings with cura. But I love this little printer. Thanks.

شكراً جزيلاً. اشتريت طابعتين، واحدة من ترونكسي وهذه آنت أي 8. لقد عملت بشكل مثالي من الطبعة الأولى وأحتاج فقط إلى بعض التغييرات الطفيفة في الإعدادات مع كورا لكني أحب هذه الطابعة الصغيرة شكراً.

Brilliant printer. Works beautifully. Real value for money. Have had no trouble with it at all.

Brilliant printer. Works beautifully. Real value for money. Have had no trouble with it at all.

Brilliant printer. Works beautifully. Real value for money. Have had no trouble with it at all.

não foi verificado.

não foi verificado.

não foi verificado.

Chegou em excelente estado! recomendo!

Chegou em excelente estado! recomendo!

Chegou em excelente estado! recomendo!

Excellent product. Very well packaged and protected. I indicate the product to all banggood.

Excellent product. Very well packaged and protected. I indicate the product to all banggood.

Excellent product. Very well packaged and protected. I indicate the product to all banggood.