So Ive got this recently and tested it. As there is no manual packaged Ive paired channels using manuals on internet. It has a nice image and when used with CP antenna it transmits nicely. It is powered by 3.3-5V and channels are as said but combination between receiver and transmitter differs so you have to pair them trying soldering combinations.

So Ive got this recently and tested it. As there is no manual packaged Ive paired channels using manuals on internet. It has a nice image and when used with CP antenna it transmits nicely. It is powered by 3.3-5V and channels are as said but combination between receiver and transmitter differs so you have to pair them trying soldering combinations.

So Ive got this recently and tested it. As there is no manual packaged Ive paired channels using manuals on internet. It has a nice image and when used with CP antenna it transmits nicely. It is powered by 3.3-5V and channels are as said but combination between receiver and transmitter differs so you have to pair them trying soldering combinations.

I will try later on

I will try later on

I will try later on

good small

good small

good small

O módulo de transmissão não corresponde à ilustração. A atribuição do pino é, portanto, questionável. Serviço de atendimento ao cliente muito ruim. As minhas perguntas foram apagadas. Obtive o material importante de outra fonte que não Banggood. Os módulos funcionam perfeitamente, portanto, são bons como avaliação.

Transmitter module does not correspond to the illustration. Pin assignment therefore questionable. Very bad customer service. My inquiries have been swept away. I obtained the important material from a source other than Banggood. Modules work flawlessly, therefore good as an evaluation.

O módulo de transmissão não corresponde à ilustração. A atribuição do pino é, portanto, questionável. Serviço de atendimento ao cliente muito ruim. As minhas perguntas foram apagadas. Obtive o material importante de outra fonte que não Banggood. Os módulos funcionam perfeitamente, portanto, são bons como avaliação.

i will not complain about the price, but i can't figure out how to hook this up, there is no info at all. the rx has the pins labelled at least, but on the tx it is a lottery game, if i put voltage on the wrong pin it will probably smoke itself. also pinout on rx is not clear, what is bx, clk, data, am i supposed to set the channels with i2c or something?

i will not complain about the price, but i can't figure out how to hook this up, there is no info at all. the rx has the pins labelled at least, but on the tx it is a lottery game, if i put voltage on the wrong pin it will probably smoke itself. also pinout on rx is not clear, what is bx, clk, data, am i supposed to set the channels with i2c or something?

i will not complain about the price, but i can't figure out how to hook this up, there is no info at all. the rx has the pins labelled at least, but on the tx it is a lottery game, if i put voltage on the wrong pin it will probably smoke itself. also pinout on rx is not clear, what is bx, clk, data, am i supposed to set the channels with i2c or something?