First of all what to honor -Midelic- from RCGroups who initiated this project and on which firmware quite a lot DIY receivers are based. Got mine today and started some testing with the delivered firmware. The center frequence is excellent as on the F802 and the last firmware from Midelic, -39 to 34. Servo output is quiet at center, no issues. Indoors the RSSI is comparable to the F802. Diversity works, as I covered each antenna in a metal tube for moment without any influence on the signal , no swamping discovered at near distance. But it seem to have the Frysky channel order > EATR and not what I expected AETR. This forces me to swap the first two servos for my Devo setup files. One issue for me at the moment..:eek: The fail-safe is little different to what you get if you bind this receiver in way you do this on the F802. The THR and the AIL channel are activ on fail-save.? Maybe there was something wrong with my Devo setup which was never discovered with the F802. I must test this a little more and will do this with the Taranis X7, because on this radio I can setup different channel orders. Will see ...

First of all what to honor -Midelic- from RCGroups who initiated this project and on which firmware quite a lot DIY receivers are based. Got mine today and started some testing with the delivered firmware. The center frequence is excellent as on the F802 and the last firmware from Midelic, -39 to 34. Servo output is quiet at center, no issues. Indoors the RSSI is comparable to the F802. Diversity works, as I covered each antenna in a metal tube for moment without any influence on the signal , no swamping discovered at near distance. But it seem to have the Frysky channel order > EATR and not what I expected AETR. This forces me to swap the first two servos for my Devo setup files. One issue for me at the moment..:eek: The fail-safe is little different to what you get if you bind this receiver in way you do this on the F802. The THR and the AIL channel are activ on fail-save.? Maybe there was something wrong with my Devo setup which was never discovered with the F802. I must test this a little more and will do this with the Taranis X7, because on this radio I can setup different channel orders. Will see ...

First of all what to honor -Midelic- from RCGroups who initiated this project and on which firmware quite a lot DIY receivers are based. Got mine today and started some testing with the delivered firmware. The center frequence is excellent as on the F802 and the last firmware from Midelic, -39 to 34. Servo output is quiet at center, no issues. Indoors the RSSI is comparable to the F802. Diversity works, as I covered each antenna in a metal tube for moment without any influence on the signal , no swamping discovered at near distance. But it seem to have the Frysky channel order > EATR and not what I expected AETR. This forces me to swap the first two servos for my Devo setup files. One issue for me at the moment..:eek: The fail-safe is little different to what you get if you bind this receiver in way you do this on the F802. The THR and the AIL channel are activ on fail-save.? Maybe there was something wrong with my Devo setup which was never discovered with the F802. I must test this a little more and will do this with the Taranis X7, because on this radio I can setup different channel orders. Will see ...

Tested working with Frsky X9D Plus. The max 18V Limits is good. Bind with D8 mode.

Tested working with Frsky X9D Plus. The max 18V Limits is good. Bind with D8 mode.

Tested working with Frsky X9D Plus. The max 18V Limits is good. Bind with D8 mode.

Работает, как написано.

Работает, как написано.

Работает, как написано.

جهاز الاستقبال جاء في عبوة مضادة للكهرباء، يبدو جيداً، سأتحقق من ذلك.

Приемник пришел в антистатической упаковке,с виду всё хорошо, проверю напишу отзыв.

جهاز الاستقبال جاء في عبوة مضادة للكهرباء، يبدو جيداً، سأتحقق من ذلك.

مرحباً، لقد تلقيت اثنين لكن واحد لا يعمل على الإطلاق شكراً لاستبداله بشكل ودي

bonjour j ai reçu deux mais un ne fonctionne pas du tout merci de le remplacer cordialement

مرحباً، لقد تلقيت اثنين لكن واحد لا يعمل على الإطلاق شكراً لاستبداله بشكل ودي

مستقبل رخيص وموثوق به مع الكثير من الميزات.

Cheap and dependable receiver with lots of features.

مستقبل رخيص وموثوق به مع الكثير من الميزات.

Repeat Buy of these RX-F82DA Receiver. Already using 2 of these Receiver.

Repeat Buy of these RX-F82DA Receiver. Already using 2 of these Receiver.

Repeat Buy of these RX-F82DA Receiver. Already using 2 of these Receiver.

все работает нормально подключить к qx 7 все норм норм все напишу показывает трал иррлло иит

все работает нормально подключить к qx 7 все норм норм все напишу показывает трал иррлло иит

все работает нормально подключить к qx 7 все норм норм все напишу показывает трал иррлло иит

Чувствительный, проверенный временем приемник Frsky 8 каналов. с телеметрией.

Чувствительный, проверенный временем приемник Frsky 8 каналов. с телеметрией.

Чувствительный, проверенный временем приемник Frsky 8 каналов. с телеметрией.

Haven't tested range but its performance so far is at par with my expectations. Failsafe works and binding is easy. I'm yet to test telemetry. Not sure if I'd select s.port or frsky on Betaflight GUI

Haven't tested range but its performance so far is at par with my expectations. Failsafe works and binding is easy. I'm yet to test telemetry. Not sure if I'd select s.port or frsky on Betaflight GUI

Haven't tested range but its performance so far is at par with my expectations. Failsafe works and binding is easy. I'm yet to test telemetry. Not sure if I'd select s.port or frsky on Betaflight GUI