Programador bom e muito rápido. Mas a voltagem de destino deve ser conectada externamente, ou o fio conectado internamente 5V USB para Vtarged MCU com proteção por Pomer Fusível. Testei com o AVR Studio 4.19: 1) Tmega324PA - ISP funciona bem. 2.) Attiny 10 - TPI Funciona bem, também com conversor HV para usar Redefinir como saída. 3.) ATXmega32A4 - PDI funciona bem.

Good and Very fast programmer. But the target Voltage must by Connected Externally, or internally connected wire 5V USB to Vtarged MCU with protect by polimer Fuse. I tested with AVR Studio 4.19: 1) Tmega324PA - ISP Work Good. 2.) Attiny 10 - TPI Works Good, also with HV converter for use Reset as output. 3.) AtXmega32A4 - PDI works Good.

Programador bom e muito rápido. Mas a voltagem de destino deve ser conectada externamente, ou o fio conectado internamente 5V USB para Vtarged MCU com proteção por Pomer Fusível. Testei com o AVR Studio 4.19: 1) Tmega324PA - ISP funciona bem. 2.) Attiny 10 - TPI Funciona bem, também com conversor HV para usar Redefinir como saída. 3.) ATXmega32A4 - PDI funciona bem.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.

Overall the device appears to work and the problem I can work around, but they are still problems none-the-less. The description says it includes a 6-wire multicolour custom connector cable. This did not arrive in the package. Additionally, the image show a single cable from the device with two header, a 10pin and a 6 pin header. However, my device came with only a 10 pin header on the cable, and a 6 pin adapter. This is not an issue. The issue is that the adapter, on the 6 pin side, has two MISO labels, instead of one MISO and one MOSI. Figured it out easy enough, but really should be fixed.

The programmer itself did not suffer any damage. Only the cd bent a bit. But I would not want to use it anyway. Works fine. I ordered one for home. I already have one at the office

The programmer itself did not suffer any damage. Only the cd bent a bit. But I would not want to use it anyway. Works fine. I ordered one for home. I already have one at the office

The programmer itself did not suffer any damage. Only the cd bent a bit. But I would not want to use it anyway. Works fine. I ordered one for home. I already have one at the office

This works fine with AVR studio 4.15 (that I use) or later I guess. You can design your own application with any AVR chip and download the code using this programmer. I use the previous version with serial connection. This one is much faster. Really good price!! It has an adapter for use of 6 or 10 pin-cable. I will order more. Be careful of the transient voltages on the target application or you will burn the device. I burned 2 of the previous original version that I bought from Atmel. It works also on windows XP. The disk that comes with it cannot be used by win Xp, but it downloaded the driver from the web!!

This works fine with AVR studio 4.15 (that I use) or later I guess. You can design your own application with any AVR chip and download the code using this programmer. I use the previous version with serial connection. This one is much faster. Really good price!! It has an adapter for use of 6 or 10 pin-cable. I will order more. Be careful of the transient voltages on the target application or you will burn the device. I burned 2 of the previous original version that I bought from Atmel. It works also on windows XP. The disk that comes with it cannot be used by win Xp, but it downloaded the driver from the web!!

This works fine with AVR studio 4.15 (that I use) or later I guess. You can design your own application with any AVR chip and download the code using this programmer. I use the previous version with serial connection. This one is much faster. Really good price!! It has an adapter for use of 6 or 10 pin-cable. I will order more. Be careful of the transient voltages on the target application or you will burn the device. I burned 2 of the previous original version that I bought from Atmel. It works also on windows XP. The disk that comes with it cannot be used by win Xp, but it downloaded the driver from the web!!

Works perfect

Works perfect

Works perfect

This is satisfactory. It took me a month to ship to Switzerland, but there is no problem in using it. But why is there a cd?

This is satisfactory. It took me a month to ship to Switzerland, but there is no problem in using it. But why is there a cd?

This is satisfactory. It took me a month to ship to Switzerland, but there is no problem in using it. But why is there a cd?

these units work like the original Atmel devices.

these units work like the original Atmel devices.

these units work like the original Atmel devices.

Product is fantastic----really work!!! Shipping time and customer service are excellent!!!

Product is fantastic----really work!!! Shipping time and customer service are excellent!!!

Product is fantastic----really work!!! Shipping time and customer service are excellent!!!

The tool works fine with Atmel Studio 7.0. Could make a firmware update and read and program several devices. The only thing was the CD delivered with the tool- it was simply EMPTY. Of course, you can find manuals in the web, but that should not happen.

The tool works fine with Atmel Studio 7.0. Could make a firmware update and read and program several devices. The only thing was the CD delivered with the tool- it was simply EMPTY. Of course, you can find manuals in the web, but that should not happen.

The tool works fine with Atmel Studio 7.0. Could make a firmware update and read and program several devices. The only thing was the CD delivered with the tool- it was simply EMPTY. Of course, you can find manuals in the web, but that should not happen.

good product ,given replacemnt

good product ,given replacemnt

good product ,given replacemnt