Opinie klientów

Napisać recenzję
  • Wszystkie recenzje(56)
  • Obrazy
  • Wideo(0)
  • Wszystkie gwiazdy
    • Wszystkie gwiazdy(56)
    • 5 Gwiazda(52)
    • 4 Gwiazda(0)
    • 3 Gwiazda(0)
    • 2 Gwiazda(1)
    • 1 Gwiazda(3)
Sortuj według:
Do podglądu
  • Do podglądu
  • Najbardziej pomocny
  • Najnowszy
Recenzje tylko z Twojego kraju (United States)
|
Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

  • 22/10/2018

    Tested, work well! Comes with Hall Sensor! But be careful, connect the Battery minus also to the frame of the Engine.

    Komentarze
    Pokaż oryginał
  • 30/03/2019

    Excellent item . Connect the two wire out put to 3 volts .The ground wire is connected to the negative wire on the two wire output. The single wire output is connected to the spark plug.Finaly connect the hall sensor the three wire output. When you pass a magnet past the sensor you will get a spark!

    Komentarze (2)
    Pokaż oryginał
  • 06/05/2019

    Products delivered to you Really wonderful

    Komentarze (1)
    Pokaż oryginał
  • 30/11/2018

    replacement worked fine . Dont use 2 cell lipo. It makes the smoke come out.

    Komentarze (1)
    Pokaż oryginał
  • 19/06/2019

    Ok, this is the third CDI I’ve bought including the one that came with the blue “Hit & Miss” engine I bought last year. Hopefully this is the one that doesn’t burn up and stop working after a couple minutes of runtime. I won’t be buying another one after this, considering I’m into this engine for over $300.00 now.

    Komentarze (1)
    Pokaż oryginał
  • 08/11/2018

    I use this ignition for my own built engines.

    Komentarze
    Pokaż oryginał
  • 28/10/2018

    Ware erhalten Alles bestens OK

    Komentarze
    Pokaż oryginał
  • 06/05/2020

    Drodzy sprzedawcy Dostawa właśnie dotarła do mnie, niestety czujnik hallu zaginął, a więc działanie systemu jest Proszę wysłać tę część za mną. Z poważaniem twój E.Rau

    Komentarze
    Pokaż oryginał
  • 16/09/2023

    Używam ich w moich silnikach do budowy mojego domu, są bardzo dobre, działają dobrze na 6 woltach i nic mniej. Wystarczy podłączyć czujnik efektu hali za pomocą przewodu przedłużającego serwo i uruchomić.

    Komentarze (1)
    Pokaż oryginał
  • 13/09/2023

    szybka wysyłka, towary super, szkoda, że nadajnik Hall nie istnieje

    Komentarze
    Pokaż oryginał
Show:

    Całkowity 0 stron

    Idź do strony

    Możesz być zainteresowany

    recommendation for you
    • US$300.99
    • US$126.99
    • US$369.99
    • US$21.99
    • US$57.99
    • US$13.99
    • US$399.99
    • US$319.99
    • US$299.99
    • US$24.99
    • US$111.99
    • US$616.99
    • US$236.99
    • US$252.99
    • US$52.99
    • US$53.99
    • US$20.99
    • US$10.99