I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

I first tried the dotMatrix on the Arduino with the Sprite and Matrix libraries. I got funny results because the column adressing is reversed. Therefore I switched to the MD_MAX72xx libraries. Make sure to change the define in the MD_MAX72xx. h file to read: #define USE_FC16_HW 1 I used the MD_Keyswitch library found at https://github.com/MajicDesigns/MD_KeySwitch and the MD_MAX72xx library found at https://github.com/MajicDesigns/MD_MAX72XX Then I pulled the source at https://github.com/MajicDesigns/MD_MAX72XX/blob/master/examples/MD_MAX72xx_ScrollChart/MD_MAX72xx_ScrollChart.ino With that you should be able to get it to work. If you use pins that are not-SPI standard, make sure to activate the call to MD_MAX72XX with four parameters, and comment out the one with two parameters.

Bardzo dobry produkt i dobra cena. Jeśli nie wiesz, jak to działa, znalazłam jeden dobry poradnik. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Jeśli wypróbujesz programy i zobaczysz, że nie działają z pierwszym. Spróbuj zmienić nazwy i ponownie wczytaj program na Arduino. Np. CS_PIN 10 DANEPIN 11 CLK_ PIN 13

very good product and good price. If you don't know how that work i found one good tutorial. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ If you try the programs and see that they do not work with the first one. Try changing the names of the pins you will use and reload the program on Arduino. e.g. CS_PIN 10 DATAPIN 11 CLK_PIN 13

Bardzo dobry produkt i dobra cena. Jeśli nie wiesz, jak to działa, znalazłam jeden dobry poradnik. https://www.makerguides.com/max7219-led-dot-matrix-display-arduino-tutorial/ Jeśli wypróbujesz programy i zobaczysz, że nie działają z pierwszym. Spróbuj zmienić nazwy i ponownie wczytaj program na Arduino. Np. CS_PIN 10 DANEPIN 11 CLK_ PIN 13

made it work with an Esp8266 board easily. good for the project I'm doing.

made it work with an Esp8266 board easily. good for the project I'm doing.

made it work with an Esp8266 board easily. good for the project I'm doing.

Excellent product. Thank you Banggood. Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::FC16_HW

Excellent product. Thank you Banggood. Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::FC16_HW

Excellent product. Thank you Banggood. Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::FC16_HW

hello everyone Watch the photos :)

hello everyone Watch the photos :)

hello everyone Watch the photos :)

A lot of fun to play around with. I used two of them for scrolling messages through the window. (see pictures) Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW for these.

A lot of fun to play around with. I used two of them for scrolling messages through the window. (see pictures) Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW for these.

A lot of fun to play around with. I used two of them for scrolling messages through the window. (see pictures) Tip: If you use the MD_parola & MD_MAX72xx libraries, use #define HARDWARE_TYPE MD_MAX72XX::ICSTATION_HW for these.

watch the video from great projects max7219/1088as led matrix and all should be fine :) I first plugged in 3v by mistake. the display was erratic. perfect on 5v

watch the video from great projects max7219/1088as led matrix and all should be fine :) I first plugged in 3v by mistake. the display was erratic. perfect on 5v

watch the video from great projects max7219/1088as led matrix and all should be fine :) I first plugged in 3v by mistake. the display was erratic. perfect on 5v

matrice led , funziona Ok , difficile da fare funzionare , io sono riuscito con la libreria (md_max72xx.h) con : vedere foto.

matrice led , funziona Ok , difficile da fare funzionare , io sono riuscito con la libreria (md_max72xx.h) con : vedere foto.

matrice led , funziona Ok , difficile da fare funzionare , io sono riuscito con la libreria (md_max72xx.h) con : vedere foto.

watch the video from great projects max7219/1088as led matrix

watch the video from great projects max7219/1088as led matrix

watch the video from great projects max7219/1088as led matrix

all the Led matrix located at the end lifted by the 4 pins connector, making all 4 display not horizontally flat.Package protected by foam, so no breaking.

all the Led matrix located at the end lifted by the 4 pins connector, making all 4 display not horizontally flat.Package protected by foam, so no breaking.

all the Led matrix located at the end lifted by the 4 pins connector, making all 4 display not horizontally flat.Package protected by foam, so no breaking.