Kunde anmeldelser

Skrive en omtale
  • Alle omtaler(132)
  • Bilder
  • Video(0)
  • Alle Stjerne
    • Alle Stjerne(132)
    • 5 Stjerne(122)
    • 4 Stjerne(10)
    • 3 Stjerne(0)
    • 2 Stjerne(0)
    • 1 Stjerne(0)
Sorter etter:
Toppanmeldelse
  • Toppanmeldelse
  • Mest nyttige
  • Senest
Anmeldelser bare fra landet ditt (United States)
|
Vis originalen

En del av anmeldelsen har blitt automatisk oversatt.

  • 06/12/2021

    The build quality seem very decent for the price. At the top is a rubber cover that protects the USB-C port and SD-card slot. The UTi690A does not have a normal camera so you're completely dependent on the thermal image shown on the display. It does however have both a tiny flashlight and a laser pointer that help in low light situations and if you're completely unsure where you're pointing it at. The menu system feels very responsive and even if the unit have less buttons than most thermal imagers, it's very easy and quick to nagive through the settings. When it comes to what information can be displayed on the screen, the following options are available: Center Point measurement, Hi/Lo Point measurement, Palette, Date&Time. This is quite limited for some use, but for the price point it seem common with these options, and have the feeling that more advanced options may be too much for the processor to handle. For the use I purchased it for, to troubleshoot 3D-Printers it seem to work great. You can easilly see single wires when they heat up as current pass through them, and the measurement at the center point gives the same readings as my FLIR E30bx does. The work range does seem to be quite accurate, you seem to gain additional detail in the images down to a distance of ~10cm from the sensor. I checked if possible to identify PCB-components and did so quite easily down to a size of ~3mm, smaller components than that and you would need an additional ZnSe lens or similar. Overall, happy with the thermal imager for the price paid, it seems to read measurements accurately as my expensive Flir E30bx unit, resolution is just lower. For checking on 3D-printers and other objects of similar size it seems to work great.

    kommentarer (1)
    Vis originalen
  • 07/12/2021

    Great device for the price, but it is more expensive than the UTi120S, after review both devices, seems to be the same. The menu system is responsive. Lacks the visible light camera that have more expensive devices, then you cannot mix normal images with thermal images. It is very easy to use and can be an excellent entry device and a replacement device for carry up when you can worry of carry a more expensive device.

    kommentarer (2)
    Vis originalen
  • 13/06/2022

    Ha llegado hoy, 6 meses después de la fecha de compra, se que no ha sido un problema del vendedor, por eso le doy 5 estrellas, pero 6 meses es mucho tiempo. Quien me da a mi 5 estrellas por mi paciencia

    kommentarer
    Vis originalen
  • 13/04/2022

    Muito satisfeito, cumpriu o prometido, exatamente como foi descrito.MUITO OBRIGADO

    kommentarer (1)
    Vis originalen
  • 03/05/2022

    Quite decent quality. I really enjoyed it.

    kommentarer
    Vis originalen
  • 13/11/2022

    good product

    kommentarer
    Vis originalen
  • 01/10/2022

    I’m impressed with everything about this product. Quality, ease of use, precision, how it fits the hand, how the design is safe for sensor, LED, laser, and LCD.

    kommentarer
    Vis originalen
  • 26/08/2022

    This camera is amazing. At this price point i believe is the one with the highest ir resolution (dont confuse it with the screen resolution). Image comes at about 10 constant fps. They only downside is the lack of a normal camera, so there is not anything like combination mode, you only see a clear thermal image. It includes a micro sd and a charging cable. The packaging feels amazing. If you dont wanna spend a fortune in UTI690B, then I recommend this one for sure!

    kommentarer
    Vis originalen
  • 26/08/2022

    It was a little tricky to install it on PC to download the photos, anyway I be managed to do'it. Till now I didn't managed to make it live on PC but it's working and that's great...

    kommentarer
    Vis originalen
  • 17/08/2022

    Produkt super jakości. Prosty w obsłudze. W zestawie karta microsd 16gb.

    kommentarer
    Vis originalen
Show:

    Total 0 sider

    Gå til side

    Du kan være interessert i

    recommendation for you
    • US$29.99
    • US$28.99
    • US$6.99
    • US$5.75
    • US$14.39
    • US$37.99
    • US$38.69
    • US$39.99
    • US$33.99
    • US$17.09
    • US$9.09
    • US$22.99
    • US$10.79
    • US$24.99
    • US$13.99
    • US$15.99
    • US$10.49
    • US$37.99