So far I like this iron handle a little more than the one that came with my T12 station. I'll start by talking about some issues I had with it. When this handle arrived, the connector's strain relief was not connected at all. The two screws were loose in the bag, so you might want to watch out for that. All of the handle components were also loose, so those may need to be tightened up. I also find that this handle sometimes gets pretty hot. Considering the standby feature, this probably wouldn't normally be a big deal, but the standby switch is VERY sensitive, so even bumping the table will bring the iron out of standby mode. All of that being said, you can see in the picture that the distance from the grip to the iron tip is less than half of the distance for the standard handle. I think this is much more comfortable to use, so for the price I think it's definitely worthwhile

So far I like this iron handle a little more than the one that came with my T12 station. I'll start by talking about some issues I had with it. When this handle arrived, the connector's strain relief was not connected at all. The two screws were loose in the bag, so you might want to watch out for that. All of the handle components were also loose, so those may need to be tightened up. I also find that this handle sometimes gets pretty hot. Considering the standby feature, this probably wouldn't normally be a big deal, but the standby switch is VERY sensitive, so even bumping the table will bring the iron out of standby mode. All of that being said, you can see in the picture that the distance from the grip to the iron tip is less than half of the distance for the standard handle. I think this is much more comfortable to use, so for the price I think it's definitely worthwhile

So far I like this iron handle a little more than the one that came with my T12 station. I'll start by talking about some issues I had with it. When this handle arrived, the connector's strain relief was not connected at all. The two screws were loose in the bag, so you might want to watch out for that. All of the handle components were also loose, so those may need to be tightened up. I also find that this handle sometimes gets pretty hot. Considering the standby feature, this probably wouldn't normally be a big deal, but the standby switch is VERY sensitive, so even bumping the table will bring the iron out of standby mode. All of that being said, you can see in the picture that the distance from the grip to the iron tip is less than half of the distance for the standard handle. I think this is much more comfortable to use, so for the price I think it's definitely worthwhile

Good quality for the proce.

Good quality for the proce.

Good quality for the proce.

Fast shipping! Great quality!

Fast shipping! Great quality!

Fast shipping! Great quality!

very fast delivery. looks nice, not tested yet

very fast delivery. looks nice, not tested yet

very fast delivery. looks nice, not tested yet

Short distance to soldering iron tip means that sometimes it can be unconfortable to hold. Good for very fine work.

Short distance to soldering iron tip means that sometimes it can be unconfortable to hold. Good for very fine work.

Short distance to soldering iron tip means that sometimes it can be unconfortable to hold. Good for very fine work.

It's a very good replacement for the 907 handle. You can grab the handle much closer to object which give you a better feeling. You can also switch the tips during operation. Be careful if you have your soldering iron heating for a long time in the station stand, the rubber at the top of the handle can become very hot!

It's a very good replacement for the 907 handle. You can grab the handle much closer to object which give you a better feeling. You can also switch the tips during operation. Be careful if you have your soldering iron heating for a long time in the station stand, the rubber at the top of the handle can become very hot!

It's a very good replacement for the 907 handle. You can grab the handle much closer to object which give you a better feeling. You can also switch the tips during operation. Be careful if you have your soldering iron heating for a long time in the station stand, the rubber at the top of the handle can become very hot!

Happy with the iron works well with the solder station Lead is nice and soft and a good length (could do with some strain relief in the handle end as mine had none) much faster to swap tips - and not had the handle get hot as others said it could Tips feel secure enough and electrical contact seems good

Happy with the iron works well with the solder station Lead is nice and soft and a good length (could do with some strain relief in the handle end as mine had none) much faster to swap tips - and not had the handle get hot as others said it could Tips feel secure enough and electrical contact seems good

Happy with the iron works well with the solder station Lead is nice and soft and a good length (could do with some strain relief in the handle end as mine had none) much faster to swap tips - and not had the handle get hot as others said it could Tips feel secure enough and electrical contact seems good

Arrived very quickly and in good packaging. the handle is made very well and works great with Ksger T12 soldering station . Has long 1M very flexible silicone cable and the tips plug in very well and are not loose at all. after a hour of use there is very little heat build up into the handle. and it fits well in to my standard Hakko stand...

Arrived very quickly and in good packaging. the handle is made very well and works great with Ksger T12 soldering station . Has long 1M very flexible silicone cable and the tips plug in very well and are not loose at all. after a hour of use there is very little heat build up into the handle. and it fits well in to my standard Hakko stand...

Arrived very quickly and in good packaging. the handle is made very well and works great with Ksger T12 soldering station . Has long 1M very flexible silicone cable and the tips plug in very well and are not loose at all. after a hour of use there is very little heat build up into the handle. and it fits well in to my standard Hakko stand...

If you are purchasing the T12 soldering station this handle is a must for using fine tips and SMD and will allow your fingers to grip the handle much closer to the job.

If you are purchasing the T12 soldering station this handle is a must for using fine tips and SMD and will allow your fingers to grip the handle much closer to the job.

If you are purchasing the T12 soldering station this handle is a must for using fine tips and SMD and will allow your fingers to grip the handle much closer to the job.

super

super

super