Alle berichten

Q: Can you supply larger unit. We are looking for 1x1x1m printer

gevraagd door MANOS op 2020-04-08 10:31:17

chocksaway Stupid answer, "You can scale it as you want it" Rubbish, it's made to be a specific size and that's it. Unless of course you wish to make it smaller. I'm building my own box made from PVC electrical tubing. All up cost.around $100 USD. I anyone hasn't noticed this thing is overbuilt to blazes. 6 pieces of metal are redundent (not needed), unless the builder intends to stand on the damned thing.

2020-05-08 02:16:03 Nuttig (0)
Verzenden
antwoorden (3)

chocksaway Sadly the thermometers in these clocks and other like it aren't known for their accuracy. I had 7 of them running on my bench and all bar 2 had different temperatures and those 2 were wrong. The best way to check them is to place the back of your hand on the clock's case and if it feels cold the temperature will be low. The opposite if it feels hot. If you're sweating it should read higher. Sorry, couldn't resist.

2020-04-06 08:48:50 Nuttig (0)
Verzenden
antwoorden (2)

chocksaway BangGood doesn't supply them ready built, but I'll give you the same offer as another buyer. If you live in Australia, send me 3 clocks, I will build two for yourself and post them to you. My payment will be the extra clock. I'm retired now, but when I was working I was earning $125 an hour, so I'm taking a big pay cut :-) By the way, I'm 71, a returned serviceman, disabled and own my own home, I will not do a runner with your clocks. It'll take at least $1,500,000 to get me to take off and then it'll be in my wheelchair. I will give you my home phone number and address for your peace of mind.

2020-04-06 08:42:22 Nuttig (0)
Verzenden
antwoorden (1)

chocksaway Definitely sounds like a bad solder joint.

2020-04-06 08:31:56 Nuttig (0)
Verzenden
antwoorden (2)

Q: can i buy the clock ready made? i will pay extra (not too much tho)

gevraagd door rauri51489 op 2018-11-07 10:22:33

chocksaway Wgere do you live? If you're an Aussie asl BangGood to send the kit to me and I'll send it on whan it's built. I can just about build them in my sleep. Everyone who visired home wanted one. I'm too soft to say no. If you wish to pay a little and for shipping it on, send me three. I'll build two and post them to you. Unfortunately shipping elsewhere in the world will be more than you pay for the clock.

2020-04-06 08:29:21 Nuttig (0)
Verzenden
antwoorden (2)

chocksaway I think you problem could be the capacitor ot capacitors alobgside the Crystal, Changing the values can get the crystal to start oscillating. I've built more than a dozen of these, but that was about two years ago when they were mono colour. I'm afraid old age gas helped me forget what those caps were. If they're 10pf change them to 20pf (that's just an example, not the actual values) When you pinch the crystal you're actually changing the values via you skin. See you're a walking talking capacitor. Multi talented aren't you? :-)

2020-04-06 08:23:59 Nuttig (0)
Verzenden
antwoorden (2)

Q: I need a schema before soldering

gevraagd door valckemarc01 op 2019-09-23 04:03:56

chocksaway Everything needed to build the clock is printed on the circuit board.

2020-04-06 08:15:54 Nuttig (0)
Verzenden
antwoorden (2)

chocksaway You're not stupid, the majority of the world's population wouldn't be able to build it either. I'm sure YouTube will have more than one video which will help you. Get searching. Good luck.

2020-04-06 08:06:51 Nuttig (0)
Verzenden
antwoorden (2)