This is good wing for long range flight.

This is good wing for long range flight.

This is good wing for long range flight.

After watching tracking for a few days. I got fed up because the package stopped moving, or should I say the tracking did. Needless to say, it's a pain that tracking doesn't follow the package all the way. So let me say this, it's cute! Nice size little wing, and I'm hoping performance exceeds its sleek look. Assembly is straightforward, and soldering is easy when you have a huge bay like this to work with. Remember to make everything easily disconnectable from the fc if you use one. It's small enough that you don't need one. The only glue I used were on the winglets, and it would be nice if they too were removable. I like the channels molded in the wing halves. Makes running cable and servo leads a "Snap! So far, this wing hasn't missed a beat. Has everything you need for good separation of the vtx with the pockets out on the wing. a hole for passing the antenna through would have been nice, but I'm not complaining at all. If you have all your parts, you can be up in the air in a few hours. Seriously, it's a breeze to get everything in and set up. Other than not having a place for the gps, I like it a lot! The only real head scratcher I could find was Elevon's. You will notice a gap that shouldn't be! Every other SonicModels plane has a molded in hinge line, no gaps. This little guy does, and I'm hoping some black packaging tape will work, as the elevon LE isn't beveled. That's it, nothing more I can say until I have maiden it successfully.

After watching tracking for a few days. I got fed up because the package stopped moving, or should I say the tracking did. Needless to say, it's a pain that tracking doesn't follow the package all the way. So let me say this, it's cute! Nice size little wing, and I'm hoping performance exceeds its sleek look. Assembly is straightforward, and soldering is easy when you have a huge bay like this to work with. Remember to make everything easily disconnectable from the fc if you use one. It's small enough that you don't need one. The only glue I used were on the winglets, and it would be nice if they too were removable. I like the channels molded in the wing halves. Makes running cable and servo leads a "Snap! So far, this wing hasn't missed a beat. Has everything you need for good separation of the vtx with the pockets out on the wing. a hole for passing the antenna through would have been nice, but I'm not complaining at all. If you have all your parts, you can be up in the air in a few hours. Seriously, it's a breeze to get everything in and set up. Other than not having a place for the gps, I like it a lot! The only real head scratcher I could find was Elevon's. You will notice a gap that shouldn't be! Every other SonicModels plane has a molded in hinge line, no gaps. This little guy does, and I'm hoping some black packaging tape will work, as the elevon LE isn't beveled. That's it, nothing more I can say until I have maiden it successfully.

After watching tracking for a few days. I got fed up because the package stopped moving, or should I say the tracking did. Needless to say, it's a pain that tracking doesn't follow the package all the way. So let me say this, it's cute! Nice size little wing, and I'm hoping performance exceeds its sleek look. Assembly is straightforward, and soldering is easy when you have a huge bay like this to work with. Remember to make everything easily disconnectable from the fc if you use one. It's small enough that you don't need one. The only glue I used were on the winglets, and it would be nice if they too were removable. I like the channels molded in the wing halves. Makes running cable and servo leads a "Snap! So far, this wing hasn't missed a beat. Has everything you need for good separation of the vtx with the pockets out on the wing. a hole for passing the antenna through would have been nice, but I'm not complaining at all. If you have all your parts, you can be up in the air in a few hours. Seriously, it's a breeze to get everything in and set up. Other than not having a place for the gps, I like it a lot! The only real head scratcher I could find was Elevon's. You will notice a gap that shouldn't be! Every other SonicModels plane has a molded in hinge line, no gaps. This little guy does, and I'm hoping some black packaging tape will work, as the elevon LE isn't beveled. That's it, nothing more I can say until I have maiden it successfully.

Good wing for long flight

Good wing for long flight

Good wing for long flight

This is a good wing with lots of room in the battery bay. A 3s 2000mah is a very snug fit but will fly for a long time on it. You will need to put a bit of weight in the nose to get the CG right. Since it is a smaller wing it does seem to be very bumpy in flight. I've tried everything I can to get it stabilized but it remains very bumpy. The foam is decent quality. A few rough landings and the front is starting to split and both wings have pulled the balsa locks out. Since buying mine I've put digital metal gear servos in, replaced the foam hinges with plastic, taped the hinges, and upgraded the motor. I'm using a matek f405 flight controller, tbs crossfire nano, walksnail nano v3, and flyfish gps.

This is a good wing with lots of room in the battery bay. A 3s 2000mah is a very snug fit but will fly for a long time on it. You will need to put a bit of weight in the nose to get the CG right. Since it is a smaller wing it does seem to be very bumpy in flight. I've tried everything I can to get it stabilized but it remains very bumpy. The foam is decent quality. A few rough landings and the front is starting to split and both wings have pulled the balsa locks out. Since buying mine I've put digital metal gear servos in, replaced the foam hinges with plastic, taped the hinges, and upgraded the motor. I'm using a matek f405 flight controller, tbs crossfire nano, walksnail nano v3, and flyfish gps.

This is a good wing with lots of room in the battery bay. A 3s 2000mah is a very snug fit but will fly for a long time on it. You will need to put a bit of weight in the nose to get the CG right. Since it is a smaller wing it does seem to be very bumpy in flight. I've tried everything I can to get it stabilized but it remains very bumpy. The foam is decent quality. A few rough landings and the front is starting to split and both wings have pulled the balsa locks out. Since buying mine I've put digital metal gear servos in, replaced the foam hinges with plastic, taped the hinges, and upgraded the motor. I'm using a matek f405 flight controller, tbs crossfire nano, walksnail nano v3, and flyfish gps.

letadlo už jasně z plastu moc dobrý a ještě vrtule pořádná

letadlo už jasně z plastu moc dobrý a ještě vrtule pořádná

letadlo už jasně z plastu moc dobrý a ještě vrtule pořádná

forever top shelfer meaning amazing.

forever top shelfer meaning amazing.

forever top shelfer meaning amazing.

Sonicmodell Baby AR Wing Pro is the baby version from Sonicmodell Wing Pro good to fly and you can use FPV Walksnail camera to fly digital.

Sonicmodell Baby AR Wing Pro is the baby version from Sonicmodell Wing Pro good to fly and you can use FPV Walksnail camera to fly digital.

Sonicmodell Baby AR Wing Pro is the baby version from Sonicmodell Wing Pro good to fly and you can use FPV Walksnail camera to fly digital.

Great model, will fly soon

Great model, will fly soon

Great model, will fly soon

brilliant little plane, tons of room and hopefully flies as good as it's bigger brother, the arpro

brilliant little plane, tons of room and hopefully flies as good as it's bigger brother, the arpro

brilliant little plane, tons of room and hopefully flies as good as it's bigger brother, the arpro

sehr schönes Modell, sehr zufrieden!

sehr schönes Modell, sehr zufrieden!

sehr schönes Modell, sehr zufrieden!