Realacc Martian III X Yapı 4mm Kol 190mm 220mm 250mm Karbon Fiber Gövde Kiti, RC Drone İçin PDB ile İncelemeleri

Realacc Martian III X Yapı 4mm Kol 190mm 220mm 250mm Karbon Fiber Gövde Kiti, RC Drone İçin PDB ile

27,67€
~~33,20€~~
Şimdi satın al

Müşteri Değerlendirmesi

4.89 üzerinden

168 incelemelerin tümünü görüntüle

5 yıldız
155 (92.3%)
4 yıldız
9 (5.4%)
3 yıldız
2 (1.2%)
2 yıldız
2 (1.2%)
1 yıldız
0 (0%)

Bir Değerlendirme Yaz Yayınlanan ilk 3 incelemeden biri senin incelemen olsun.2 kat Banggood puanı kazan!

Toplam (168) İnceleme
(19) Görüntü
(6) Video
Tüm Yıldızlar
- Tüm Yıldızlar(168)
- 5 Yıldız(155)
- 4 Yıldız(9)
- 3 Yıldız(2)
- 2 Yıldız(2)
- 1 Yıldız(0)

Göre sırala:

En İyi İnceleme

En İyi İnceleme
En Yararlı
En Son

Yalnızca ülkenizden yorumlar (United States)

Orjinali göster

İncelemenin bir kısmı otomatik olarak çevrildi.

Vassa69VIP3
NO
19/09/2017

Got the 250 version to use with 6" props. Modified it quite a bit. Normally the frame is wider than long and i made it a true X.

Got the 250 version to use with 6" props. Modified it quite a bit. Normally the frame is wider than long and i made it a true X.

Got the 250 version to use with 6" props. Modified it quite a bit. Normally the frame is wider than long and i made it a true X.
5

Yorumlar (2)

Orjinali göster
rchobbybuddiesVIP1
US
23/11/2016

All pieces were there plus extra. seems to be cut well and easy to build, will report back on how it crashes. But starting at 116 grams and only 4" props doesnt give me any excitement. May have to order the 5" arms

All pieces were there plus extra. seems to be cut well and easy to build, will report back on how it crashes. But starting at 116 grams and only 4" props doesnt give me any excitement. May have to order the 5" arms

All pieces were there plus extra. seems to be cut well and easy to build, will report back on how it crashes. But starting at 116 grams and only 4" props doesnt give me any excitement. May have to order the 5" arms
3

Yorumlar

Orjinali göster
Ramiro NeutaVIP2
CO
02/03/2018

Es un frame muy resistente y de muy buena calidad. El bicho ha quedado con muy buena pinta. 100% recomendado Gracias Banggood

Es un frame muy resistente y de muy buena calidad. El bicho ha quedado con muy buena pinta. 100% recomendado Gracias Banggood

Es un frame muy resistente y de muy buena calidad. El bicho ha quedado con muy buena pinta. 100% recomendado Gracias Banggood
2

Yorumlar

Orjinali göster
maximilian4VIP2
HU
20/03/2017

Nice quality frame, the arms are thicker than 4mm. It looks durable.

Nice quality frame, the arms are thicker than 4mm. It looks durable.

Nice quality frame, the arms are thicker than 4mm. It looks durable.
3

Yorumlar

Orjinali göster
Eddyhall2014VIP1
US
29/11/2016

I had this frame put together and in the air the day I got it! The only problem that I have is almost all of my 6in props will touch tips! I bought this frame to run the 6in props but now I'm going to have to rethink this. It's only a millimeter to small :(

I had this frame put together and in the air the day I got it! The only problem that I have is almost all of my 6in props will touch tips! I bought this frame to run the 6in props but now I'm going to have to rethink this. It's only a millimeter to small :(

I had this frame put together and in the air the day I got it! The only problem that I have is almost all of my 6in props will touch tips! I bought this frame to run the 6in props but now I'm going to have to rethink this. It's only a millimeter to small :(
6

Yorumlar (1)

Orjinali göster
asbikVIP2
HU
03/04/2017

Quality frame, comes in decent packaging. No burrs, so no need to burnish the components. Howewer the arm's thickness is 3,5 mm, not 4 as the description says. The manual is clear on how to assemble.

Quality frame, comes in decent packaging. No burrs, so no need to burnish the components. Howewer the arm's thickness is 3,5 mm, not 4 as the description says. The manual is clear on how to assemble.

Quality frame, comes in decent packaging. No burrs, so no need to burnish the components. Howewer the arm's thickness is 3,5 mm, not 4 as the description says. The manual is clear on how to assemble.
2

Yorumlar

Orjinali göster
crazyotrokVIP3
DE
01/02/2017

Frame ist einfach genial, in Verbindung mit HGLRC V3.1. Platz ist jedoch richtig knapp. Verbaut 20A ESC und 2300kv Motoren liegt in der Luft wie ein Brett, danke Akku-Befestigung unten. Wenn jemand sich den Frame überlegt, kauft bitte gleich den Akku-Schutz dazu, dann habt ich nicht das Gefühl den Akku Kaputt zu machen beim Landen.

Frame ist einfach genial, in Verbindung mit HGLRC V3.1. Platz ist jedoch richtig knapp. Verbaut 20A ESC und 2300kv Motoren liegt in der Luft wie ein Brett, danke Akku-Befestigung unten. Wenn jemand sich den Frame überlegt, kauft bitte gleich den Akku-Schutz dazu, dann habt ich nicht das Gefühl den Akku Kaputt zu machen beim Landen.

Frame ist einfach genial, in Verbindung mit HGLRC V3.1. Platz ist jedoch richtig knapp. Verbaut 20A ESC und 2300kv Motoren liegt in der Luft wie ein Brett, danke Akku-Befestigung unten. Wenn jemand sich den Frame überlegt, kauft bitte gleich den Akku-Schutz dazu, dann habt ich nicht das Gefühl den Akku Kaputt zu machen beim Landen.
2

Yorumlar (1)

Orjinali göster
xphilleboxVIP3
SE
21/03/2017

I really like this frame, the weight for 6 inch props is not as stated in the description. Don't remember exactly but the weight was around 130 grams I think. Pros: Good looking, durable, can be made to long-x with some 3d-prints Cons: A little heavy, camera sticks out a little bit too much in the front

I really like this frame, the weight for 6 inch props is not as stated in the description. Don't remember exactly but the weight was around 130 grams I think. Pros: Good looking, durable, can be made to long-x with some 3d-prints Cons: A little heavy, camera sticks out a little bit too much in the front

I really like this frame, the weight for 6 inch props is not as stated in the description. Don't remember exactly but the weight was around 130 grams I think. Pros: Good looking, durable, can be made to long-x with some 3d-prints Cons: A little heavy, camera sticks out a little bit too much in the front
3

Yorumlar

Orjinali göster
trootootooVIP3
UA
11/07/2018

Пришла вот такая рамка. довольно тяжелая но для первой думаю пойдёт.

Пришла вот такая рамка. довольно тяжелая но для первой думаю пойдёт.

Пришла вот такая рамка. довольно тяжелая но для первой думаю пойдёт.
1

Yorumlar

Orjinali göster
CurryKittenVIP2
GB
07/08/2017

I was impressed by my Martian III frame. It's got very tough 4mm carbon legs, and there's a decent amount of room to layout your electronics. I think it suits a stack arrangement best though. I put mine together in a 3 part blog post over at http://www.currykitten.co.uk with a youtube video available at https://www.youtube.com/watch?v=XAOTOdrB-zo

I was impressed by my Martian III frame. It's got very tough 4mm carbon legs, and there's a decent amount of room to layout your electronics. I think it suits a stack arrangement best though. I put mine together in a 3 part blog post over at http://www.currykitten.co.uk with a youtube video available at https://www.youtube.com/watch?v=XAOTOdrB-zo

I was impressed by my Martian III frame. It's got very tough 4mm carbon legs, and there's a decent amount of room to layout your electronics. I think it suits a stack arrangement best though. I put mine together in a 3 part blog post over at http://www.currykitten.co.uk with a youtube video available at https://www.youtube.com/watch?v=XAOTOdrB-zo
2

Yorumlar

Orjinali göster