Klantbeoordelingen

Schrijf een beoordeling
  • Alle beoordelingen(20)
  • Afbeeldingen
  • Videos
  • Ster
    • Ster(20)
    • 5 Ster(19)
    • 4 Ster(0)
    • 3 Ster(0)
    • 2 Ster(1)
    • 1 Ster(0)
Sorteren op:
Top recensie
  • Top recensie
  • Meest nuttig
  • meest recent
Recensies alleen uit uw land (United States)
|
Toon origineel

Een deel van de recensie is automatisch vertaald.

  • 27/02/2017

    These shields are clones of the currently unavailable V5 shield from adafruit. I have used them for several projects with good results. However, buyers should be aware of a defect that has the potential to damage your arduino board if not corrected. There are two mistaken connections and two missed connections on each board. These affect the ground and +5V pads. The mistaken connections are 1) between one side ground pad and the +5V side pads and 2) between the side +5V and the center ground pad. The missed connections are 1) between the two side ground pads, and 2) between the side +5V pads and the center +5V pad. To make this easy to address, I have provided photos showing the mistaken connections in white and the missed connections in yellow. The mistaken connections must be scratched out and the missed connections made using wire or (as I do) conductive paint. Photos of the fixed boards are also provided. Without this error these boards would certainly rate 5/5

    Reacties
    Toon origineel
  • 15/02/2019

    Bonne fabrication, très propre

    Reacties
    Toon origineel
  • 09/04/2019

    Recibidos correctamente.Atencion, hay una linea de GND que no esta conectada al borde donde van las lineas del Arduino, hay que hacer un pequeño puente para que todas las lineas de masa esten unidas.Salvo este pequeño detalle las placas se ven de muy buena calidad y las anteriores que recibi funcionaron muy bien.

    Reacties
    Toon origineel
  • 22/12/2016

    arduino did not put all of their expansion connectors on a 0.1" pitch so using standard perf board is not an option. Therefore, these small cheap PCBs are ideal for putting together experimental circuits. Just to make life easier, they have the pin assignment marked on the silk screen. Why buy just one when you could buy 5 and always have a spare (or two) on hand.

    Reacties
    Toon origineel
  • 30/03/2017

    These board blanks were delivered as promised. I personally like the fact that nothing at all is soldered onto them. I prefer that since I like to all the prototype work on a blank board and add the mounting pins as required after the fact.

    Reacties
    Toon origineel
  • 09/02/2017

    as ordered

    Reacties (1)
    Toon origineel
  • 15/08/2016

    Good and cheap solutation to add own devices for the Wemos Dx and Arduiono boards. Good quality of the pcb.

    Reacties
    Toon origineel
  • 02/01/2021

    muy utiles para montar pequeños circuitos para montar sobre los arduinos uno.

    Reacties
    Toon origineel
  • 27/06/2020

    Perfekt!

    Reacties
    Toon origineel
  • 23/05/2020

    as expected

    Reacties
    Toon origineel
Show:

    Totaal 0 Pagina's

    Ga naar pagina

    recommendation for you
    • US$19.99
    • US$4.40
    • US$16.00
    • US$19.99
    • US$8.99
    • US$7.99
    • US$10.99
    • US$47.99
    • US$4.99
    • US$6.99
    • US$12.99
    • US$5.99
    • US$12.99
    • US$5.99
    • US$3.99
    • US$12.99
    • US$18.99
    • US$11.99