30.5x30.5mm EXUAV Flytower F4 Pro V2 OSD FC AIO 48CH 25/200/600 mW VTX & 35A BL_S DShot600 4In1 ESC
İncelemenin bir kısmı otomatik olarak çevrildi.
Nice FC! Easy to install and works good so far. Also the Runcam Split 2 works fine from the PDB ( cam connection) so no need to give her the full battery voltage.
Produit de grande qualité. Très peu de soudures, juste les fils moteurs et le condensateur. Connecteur en dur entre esc et FC, connecteur jst pour récepteur, buzzer, led et vtx.Pas besoin de soft-mount. Très pratique. Bonne sensation de vol, esc au top, vtx bien.
Everything seemed to be good until I crashed hard on concrete pavement (got failsafe), and 10 pin connector between FC and 4in1 ESC had been ripped off both boards :( Had to solder a bunch of wires. That's why other similar board now have wire connectors.
sauber verarbeitet sehr passgenau
Top flightower.
Rly good quality and performance,love it.
The Fly tower looks amazing, and really high quality. LOOKS are not the only thing The first bad point is lack of pins or pads with 5V, 3V3 and GND supplies for GPS and Datalogger. So expanding this fly tower is not easy Second bad point is that it caught fire mid-flight. See pictures for the result
easy to install there are no fc soft mounting in the packet.
This FC looks really good, it flies smoothly at a relatively good price... But it has a major flaw, the pin connectors connecting the FC to the 4in1 ESC, first few flights was awesome. After a few flights, vtx would get noisy and burned out. So i ordered a 2ne one, the latter after a slight crash would not power on unless pressure was apllied where pin connectors are, once it powered off during flight. those pin connectors does not seem to be reliable enough, BEWARE!!!