DICKFRANKLINhsv
Q: Decal for top of fuselage was not in the box. Missing decal looks bad and reduces fuselage strength.
Asked by DICKFRANKLINhsv on 2024-09-03 10:27:24
lmg_1 Didyou go through the ESC safety check at power-up (> 2 seconds with min throttle before start) ?
2024-06-14 12:41:53 Helpful (0)
DICKFRANKLINhsv@Ken Ken:Thanks or the tip. I tried it on 2 Spektrum transmitters (Dxe and Dx6e), but still no movement. Also tried an external brushed ESC connected to the Rx's trottle port; same result. Maybe the Spektrum Txs are not compatible with this Rx.
Q: can you please sell only the motor
Asked by BG556348101 on 2020-12-16 01:42:30
DICKFRANKLINhsv It is easy to find an equivalent motor.
2024-06-25 03:40:50 Helpful (0)
Q: What is the best receiver/ transmitter combo to use with the servos provided?
Asked by BG382212514 on 2024-01-20 11:22:46
DICKFRANKLINhsv Any 4 channel (motor, ailerons, elevator and rudder) receiver and transmitter should be OK. You won't need a lot of range since you probably won't fly more than 200 meters away.
2024-06-07 02:00:08 Helpful (0)
Q: what size prop should be used?
Asked by DICKFRANKLINhsv on 2024-05-05 02:13:43
Q: Will any other transmitters work? What is the radio protocol, ie, DSMX, etc?
Asked by DICKFRANKLINhsv on 2021-02-15 09:15:03
volki bilmiyorum
2023-04-07 12:35:27 Helpful (0)
BG111254537 Yes, this is a bank and yank setup. For the elevators you will need to use two channels on your receiver. Each elevator servo should be in its own channel. Once done you will have to go into your transmitter and setup one of your elevator servos to be slaved to the other channel. That way both will move at the same time. You might have to reverse one or both servos in you transmitter as well to make sure they are moving in the correct direction. The ailerons can just use a “Y” harness and plugged into your channel 4 slot. If you want Flaperons for slower landing speed you will have to setup your ailerons like the elevators.
2022-12-10 07:11:26 Helpful (1)
Q: Does the LED flash whenever the buzzer sounds?
Asked by DICKFRANKLINhsv on 2022-01-02 07:42:46
Grumpy12 Yes it does
2022-01-02 08:11:33 Helpful (0)Q: Does it have metal gear servos?
Asked by DICKFRANKLINhsv on 2021-08-06 12:42:48
BG813155416 No but the servos are cheep and break easily. I've broken several while learning to fly. I keep extras on hand. But I haven't broken any in quite a while. Just don't crash and you'll be fine.
2021-08-11 01:44:02 Helpful (0)
sal.fav 19.5 inches long
2021-02-06 07:54:59 Helpful (1)We sincerely invite you to subscribe to the Invite Answer email!
If you subscribe, we will invite you via email to answer questions people have about products. By subscribing you]ll also earn the "Helpful Badge"! You can unsubscribe at any time on the privacy settings page.
Help others and be happier!
Thank you for subscribing! You have also earned a badge!
Thank you! Your answer will help ###name### and ###num### other people!
Check awaiting answers to see more people who need help.
Thank you! Your answer will help ###name### and ###num### other people!
Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!
We invite you to subscribe to our Invite Answer email!
Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.
