All Messages

Q: is it compatible with 2 cells (NO BEC)?

Asked by Mangustiano on 2022-06-16 08:41:35

kaji-san As instruction says this is high voltage version so you can use this with 2cell Lipo battery.

2022-06-17 09:14:41 Helpful (0)
Submit
Answers (2)

kaji-san The dimension of the body shows on the product page near bottom. Weight of the screen body is 556g and of the screen cover is 309g then total is 865g. Dimension of the screen body with screen cover is 306mmx203mmx12mm. I hope this would be the answer for your question.

2022-02-14 07:39:24 Helpful (0)
Submit
Answers (2)

Q: Will this bind to a spektrum dx6?

Asked by BG512457571 on 2022-02-01 10:26:40

kaji-san Yes, if you select to buy DSMX,2 one.

2022-02-01 06:46:12 Helpful (0)
Submit
Answers (3)

kaji-san I recommend 1)RadioMasterTX16s with JP4IN1 multiprotocol ( I am using this one now) or 2) Jumper T-Lite 16CH Hall Sensor Gimbals JP4IN1 Multi-protocol RF System OpenTX Transmitter (Pros.: handy, Cons.: very small display) or 3)RadioMaster TX12 16ch OpenTX Multi-Module Transmitter( unfortunately CC2500 model only) ( pros.: good size) or 4) Any other Multi-protocol RF System OpenTX Transmitter. But You are better buy Transmitter equipped JP4IN1 multiprotocol module which can use almost any type of receiver you want.

2021-10-07 09:27:07 Helpful (0)
Submit
Answers (3)

Q: What models of servo fits the Oversky MXL-RX62H V3

Asked by BG856438426mc on 2021-06-23 05:14:36

kaji-san Servo for 1S lipo.

2021-06-24 08:22:38 Helpful (0)
Submit
Answers (2)

Q: Hi. Whats the base system ? (ESP or STM or OTP-µC)

Asked by BG643104701 on 2021-06-15 03:21:57

kaji-san I guess the base system for this is using with CSS811.

2021-06-16 08:10:14 Helpful (0)
Submit
Answers (1)

kaji-san You can use this display with PC. I rather do not know if this can use with smart phone.

2021-04-14 09:29:59 Helpful (0)
Submit
Answers (3)

kaji-san You cannot use this for FlySky which uses different protocol. The servo operation speed is not so different from a regular servo but depends on the servo spec.

2021-03-11 06:07:59 Helpful (0)
Submit
Answers (3)