Όλα τα μηνύματα

Ερ: What is the name of the grey input/output connectors visible in the product pictures?

Ερώτηση από bang_but_good επί 2021-08-15 01:45:03

Terry666 Anderson connector

2022-02-01 08:01:52 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (4)

Ερ: How many A DC it can take ?

Ερώτηση από amerkhafagi επί 2022-02-20 05:20:56

bang_but_good It is in the name, plugs with the name starting with XT90 can safely take a continuous load of 90 amps, and for example plugs starting with XT60 can safely take a continuous load of 60 amps, and XT30 can safely take a continuous load of 30 amps, etc...

2022-02-20 02:47:16 Βοηθητικός (2)
υποβάλλουν
Απαντήσεις (1)

Ερ: How many lumens of light do each single one of these lamps produce?

Ερώτηση από bang_but_good επί 2021-01-21 04:38:49

Verries That depends entirely on the bulbs you put in them, these are just the projector part

2021-12-04 12:51:04 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

pendersricardo Ifyou leave it running long enough you will burn yourself even with only 1A, the first time that you turn it on you'll smell that it's cooking pretty fast, DO NOT TOUCH IT after having it running longer than 5 minutes maybe even less. Don't listen to what the others said, my answer is an honest one speaking from experience with this thing myself.

2021-06-30 01:13:25 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (4)

Ερ: How can this BMS have balance function if there are no balance wires going to each cell group?

Ερώτηση από bang_but_good επί 2019-07-29 08:22:52

davidgilson I don't know for sure as I don't make this, but I believe it does have balance connections. B-=0V, B1=4.2V, B2=8.4V, B+=12.6V.

2021-07-24 06:44:22 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

Ερ: Also include female hole, yes?

Ερώτηση από bang_but_good επί 2021-01-19 12:50:27

Angel Si, es macho y hembra

2021-01-19 05:48:06 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: Can you give this ESP*****v on VCC or will that blow up the chip?

Ερώτηση από bang_but_good επί 2019-06-15 08:51:19

Damo_the_Sane Do not use 5V directly on the ESP-01, it will blow it up. It needs 3.3V.

2020-11-22 09:09:20 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (3)

Ερ: Will these be useful with an SKR Mini E3 V1.2 board also installed?

Ερώτηση από scrorses επί 2020-04-04 04:45:14

bang_but_good No, TL-Smoothers are not useful with a SKR Mini E3 V1.2 board already equipped with TMC2209 (or equivalent) Trinamic stepper drivers. EXPLANATION: The SKR Mini E3 V1.2 uses on-board TMC2209 (or equivalent) Trinamic stepper drivers, TL-Smoothers provide electrical dampening (albeit somewhat crude) of the recirculating motor coil current to prevent various vibration artifacts such as ringing, shadowing, ghosting and rippling. Your board has onboard Trinamic stepper drivers. Trinamic stepper drivers actively measure and adjust motor coil current to achieve optimal electrical dampening, this automatically makes the stepper motors run quieter and mitigates the aforementioned vibration artifacts. For additional (and a more technical) explanation see this website (replace all underscores with a normal slash): blog.trinamic.com_2018_08_16_tl-smoothers-do-they-make-sense By the way, you could have easily found all this if you had spent a little time Googling the answer :)

2020-04-04 05:14:18 Βοηθητικός (3)
υποβάλλουν
Απαντήσεις (2)

bang_but_good No, this lamp can only be controlled via WiFi (with the BlitzWolf app on your phone or the TuyaSmart app, with Alexa or with Google Home) or this lamp van be controlled via the included infrared remote control.

2020-02-16 09:08:00 Βοηθητικός (1)
υποβάλλουν
Απαντήσεις (2)

Ερ: What is "CCT" (RGB-CCT)??

Ερώτηση από frankgegna επί 2020-02-02 03:35:06

bang_but_good CCT, or Configurable Color Temperature, means the LEDs inside the bulb are capable of emitting white light anywhere from Cold White to Neutral White and up to Warm White. So basically the color temperature of the LED bulb supports a Configurable Color Temperature, CCT, as it is capable of producing the entirety of the commonly available spectrum of white light. (from ~2500K to ~6500K)

2020-02-05 02:40:42 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (1)

Ερ: The pitcure shows a box that has 5 storage cases, is this what you get for ***** ?

Ερώτηση από trdarcy επί 2019-01-10 10:03:58

bang_but_good No, you get one box which can store 4x 18650 batteries.

2019-10-03 08:01:24 Βοηθητικός (0)
υποβάλλουν
Απαντήσεις (2)

bang_but_good OnRFXcom you need firmware Ext1 to enable reception of the protocol used by these devices. Then you need to use RFXmngr to enable the "Rubicson, Alecto,Banggood" protocol (and ONLY that protocol, unless you need specific other protocols, if you do then you can enable those too). Then click "Set Mode" and "Save Settings" to commit the settings to the RFXcom device memory. You can download the Ext1 firmware and the RFXmngr software from the RFXcom website downloads section. If you need extra information just read the RFXcom manual (also in downloads section). All the information you need is in there, that is where I got it from :)

brkhoury 22/10/2018
0
Σχόλια (2)