I purchased the kit version of this plane and installed my own motor, esc and servos. The motor I used was a surpass hobby 3548 900kv motor I bought here at Banggood. I used a 12x6 2 bladed prop and a 60 amp esc that I also purchased here. I also set the plane up to run a 2200 4S battery, but to use this I had to cut out the floor of the battery compartment and glue in some wood pieces across the bottom of the plane to hold the battery in. This was necessary because the battery was a little too thick. If you stick with a 3 cell it will be fine as is. I used just standard 9 gram servos for the ailerons and elevator and rudder. Very straightforward build, no problems. I did lay a couple of carbon fiber strips across the 2 halves of the wing joint and glued them in for extra strength. The plane is very light for its size and has ridiculous power with this motor. You can take off and immediately rotate into a vertical climb and climb away. Of course its not scale. What fun is scale? It flies excellent and is very easy to land. I did not cut in flaps but you easily could. It really doesn't need them. You could also program flaperons if you wanted to. Super great for the price. Only semi bad thing is the cowl doesn't match the color of the plane at all, but not a big deal. Have fun!

I purchased the kit version of this plane and installed my own motor, esc and servos. The motor I used was a surpass hobby 3548 900kv motor I bought here at Banggood. I used a 12x6 2 bladed prop and a 60 amp esc that I also purchased here. I also set the plane up to run a 2200 4S battery, but to use this I had to cut out the floor of the battery compartment and glue in some wood pieces across the bottom of the plane to hold the battery in. This was necessary because the battery was a little too thick. If you stick with a 3 cell it will be fine as is. I used just standard 9 gram servos for the ailerons and elevator and rudder. Very straightforward build, no problems. I did lay a couple of carbon fiber strips across the 2 halves of the wing joint and glued them in for extra strength. The plane is very light for its size and has ridiculous power with this motor. You can take off and immediately rotate into a vertical climb and climb away. Of course its not scale. What fun is scale? It flies excellent and is very easy to land. I did not cut in flaps but you easily could. It really doesn't need them. You could also program flaperons if you wanted to. Super great for the price. Only semi bad thing is the cowl doesn't match the color of the plane at all, but not a big deal. Have fun!

I purchased the kit version of this plane and installed my own motor, esc and servos. The motor I used was a surpass hobby 3548 900kv motor I bought here at Banggood. I used a 12x6 2 bladed prop and a 60 amp esc that I also purchased here. I also set the plane up to run a 2200 4S battery, but to use this I had to cut out the floor of the battery compartment and glue in some wood pieces across the bottom of the plane to hold the battery in. This was necessary because the battery was a little too thick. If you stick with a 3 cell it will be fine as is. I used just standard 9 gram servos for the ailerons and elevator and rudder. Very straightforward build, no problems. I did lay a couple of carbon fiber strips across the 2 halves of the wing joint and glued them in for extra strength. The plane is very light for its size and has ridiculous power with this motor. You can take off and immediately rotate into a vertical climb and climb away. Of course its not scale. What fun is scale? It flies excellent and is very easy to land. I did not cut in flaps but you easily could. It really doesn't need them. You could also program flaperons if you wanted to. Super great for the price. Only semi bad thing is the cowl doesn't match the color of the plane at all, but not a big deal. Have fun!

This is a great plane. Fly's great and looks great.

This is a great plane. Fly's great and looks great.

This is a great plane. Fly's great and looks great.

Perfect cessna 182 140mm wingspan for begginers. 3536 motor, 30A esc and 4 servo, no flaps.

Perfect cessna 182 140mm wingspan for begginers. 3536 motor, 30A esc and 4 servo, no flaps.

Perfect cessna 182 140mm wingspan for begginers. 3536 motor, 30A esc and 4 servo, no flaps.

pretty solid plane. only issue is the weak nose gear. Although it was my fault for landing a little fast the plane bounced about 4 inches into the air and snapped the front wheel mount. repaired with epoxy but still breaks easily if not a perfect soft landing.

pretty solid plane. only issue is the weak nose gear. Although it was my fault for landing a little fast the plane bounced about 4 inches into the air and snapped the front wheel mount. repaired with epoxy but still breaks easily if not a perfect soft landing.

pretty solid plane. only issue is the weak nose gear. Although it was my fault for landing a little fast the plane bounced about 4 inches into the air and snapped the front wheel mount. repaired with epoxy but still breaks easily if not a perfect soft landing.

Cessna 182 1400mm wing, good classic trainer. In PNP mode came with 3536 800kv motor and 30A ESC. Servo are 4x9g, with possibility for flaps making it yourself. Good double box packing.

Cessna 182 1400mm wing, good classic trainer. In PNP mode came with 3536 800kv motor and 30A ESC. Servo are 4x9g, with possibility for flaps making it yourself. Good double box packing.

Cessna 182 1400mm wing, good classic trainer. In PNP mode came with 3536 800kv motor and 30A ESC. Servo are 4x9g, with possibility for flaps making it yourself. Good double box packing.

mala experiencia,producto roto.

mala experiencia,producto roto.

mala experiencia,producto roto.

Like in description - "1 week delivery". Well packed. Looks awesome, soon i start training.

Like in description - "1 week delivery". Well packed. Looks awesome, soon i start training.

Like in description - "1 week delivery". Well packed. Looks awesome, soon i start training.

ARRIVED COWLING DAMAGED, SEE PHOTO, POOR QUALITY, AND TOTALLY INFERIOR TO THE FMS PRODUCT, YOU ONLY GET WHAT YOU PAY FOR, SO BE WARNED

ARRIVED COWLING DAMAGED, SEE PHOTO, POOR QUALITY, AND TOTALLY INFERIOR TO THE FMS PRODUCT, YOU ONLY GET WHAT YOU PAY FOR, SO BE WARNED

ARRIVED COWLING DAMAGED, SEE PHOTO, POOR QUALITY, AND TOTALLY INFERIOR TO THE FMS PRODUCT, YOU ONLY GET WHAT YOU PAY FOR, SO BE WARNED

looks very good and fast delivery

looks very good and fast delivery

looks very good and fast delivery

Great plane for begginers or intermediate flyers. Ready to instal 3536 brushless motor with 750-950kv, 40Aesc and 4x9g servo motors.

Great plane for begginers or intermediate flyers. Ready to instal 3536 brushless motor with 750-950kv, 40Aesc and 4x9g servo motors.

Great plane for begginers or intermediate flyers. Ready to instal 3536 brushless motor with 750-950kv, 40Aesc and 4x9g servo motors.