The H107L is very compact and affordable. It is suitable as a X4, or H107L replacement FC as well as a foundation of a DIY micro Quad. It supports 4 motors, 6 switchable LEDs and an Anti-Flip mode. Runs on 1S 3.7V Lipo with a LOSI connector. Built-in trace antenna.

The H107L is very compact and affordable. It is suitable as a X4, or H107L replacement FC as well as a foundation of a DIY micro Quad. It supports 4 motors, 6 switchable LEDs and an Anti-Flip mode. Runs on 1S 3.7V Lipo with a LOSI connector. Built-in trace antenna.

The H107L is very compact and affordable. It is suitable as a X4, or H107L replacement FC as well as a foundation of a DIY micro Quad. It supports 4 motors, 6 switchable LEDs and an Anti-Flip mode. Runs on 1S 3.7V Lipo with a LOSI connector. Built-in trace antenna.

In my experience The LED version board 107L did not work with old version 107 motors. It flew but very un-controllable. So the motors are different. So 107 and 107L electronic parts is not inter-changeable!

In my experience The LED version board 107L did not work with old version 107 motors. It flew but very un-controllable. So the motors are different. So 107 and 107L electronic parts is not inter-changeable!

In my experience The LED version board 107L did not work with old version 107 motors. It flew but very un-controllable. So the motors are different. So 107 and 107L electronic parts is not inter-changeable!

After a crash my receiver board didn't work anymore.Ordered one from banggood and also was my first order on banggood. After 2 weeks I received the package but couldn't get it to work properly. Without any problems,banggood send me a new one and that one worked fine.Best customer service ever for a online shop and I placed a few more orders.It even looks like my quad is flying a little better then with the original receiver board.

After a crash my receiver board didn't work anymore.Ordered one from banggood and also was my first order on banggood. After 2 weeks I received the package but couldn't get it to work properly. Without any problems,banggood send me a new one and that one worked fine.Best customer service ever for a online shop and I placed a few more orders.It even looks like my quad is flying a little better then with the original receiver board.

After a crash my receiver board didn't work anymore.Ordered one from banggood and also was my first order on banggood. After 2 weeks I received the package but couldn't get it to work properly. Without any problems,banggood send me a new one and that one worked fine.Best customer service ever for a online shop and I placed a few more orders.It even looks like my quad is flying a little better then with the original receiver board.

Great controller. Suitable not only for Hubsan quads but also other similar models from other brands. Used it with a Ladybird frame and booms and it worked very well too. If you have a under performing (unstable, not responsive, slow, etc) mini quad place this board in it and it will fly great.

Great controller. Suitable not only for Hubsan quads but also other similar models from other brands. Used it with a Ladybird frame and booms and it worked very well too. If you have a under performing (unstable, not responsive, slow, etc) mini quad place this board in it and it will fly great.

Great controller. Suitable not only for Hubsan quads but also other similar models from other brands. Used it with a Ladybird frame and booms and it worked very well too. If you have a under performing (unstable, not responsive, slow, etc) mini quad place this board in it and it will fly great.

I bought two. received them after 19 days to The Netherlands. I replaced one board in my Hubsan and it works flawlessly damn good quality and I think it's original because no binding problem and also it was calibrated for first use :-). ****but Dear Banggood please don't send circut boards in a plastic envelopes. thanks from a happy buyer.

I bought two. received them after 19 days to The Netherlands. I replaced one board in my Hubsan and it works flawlessly damn good quality and I think it's original because no binding problem and also it was calibrated for first use :-). ****but Dear Banggood please don't send circut boards in a plastic envelopes. thanks from a happy buyer.

I bought two. received them after 19 days to The Netherlands. I replaced one board in my Hubsan and it works flawlessly damn good quality and I think it's original because no binding problem and also it was calibrated for first use :-). ****but Dear Banggood please don't send circut boards in a plastic envelopes. thanks from a happy buyer.

Arrived in original Hubsan packaging. Contact points came with a little solder already applied, making motor and LED installation pretty easy. Highly recommend using a dab of flux and a 60/40 rosin core solder. Did not have any issues syncing with my spare Hubsan X4 controller. A great part if you need a spare circuit board.

Arrived in original Hubsan packaging. Contact points came with a little solder already applied, making motor and LED installation pretty easy. Highly recommend using a dab of flux and a 60/40 rosin core solder. Did not have any issues syncing with my spare Hubsan X4 controller. A great part if you need a spare circuit board.

Arrived in original Hubsan packaging. Contact points came with a little solder already applied, making motor and LED installation pretty easy. Highly recommend using a dab of flux and a 60/40 rosin core solder. Did not have any issues syncing with my spare Hubsan X4 controller. A great part if you need a spare circuit board.

As advertised, this is a direct replacement for the complete electronics pack inside your Hubsan. I actually bought it to build a custom micro quad using a small plywood body and some X4 motors. Pairs with the stock transmitter (remote) no problem. I understand that the MOSFETS can handle up to 2A current at 3.7V so possibly slightly bigger coreless motors could be used. If you are new to electronics, you will have to desolder the motor and led leads to remove from your old hubsan body and resolder the new board. Use a low wattage or variable soldering iron and forceps/tweezers also wouldn't hurt to hold the wires.

As advertised, this is a direct replacement for the complete electronics pack inside your Hubsan. I actually bought it to build a custom micro quad using a small plywood body and some X4 motors. Pairs with the stock transmitter (remote) no problem. I understand that the MOSFETS can handle up to 2A current at 3.7V so possibly slightly bigger coreless motors could be used. If you are new to electronics, you will have to desolder the motor and led leads to remove from your old hubsan body and resolder the new board. Use a low wattage or variable soldering iron and forceps/tweezers also wouldn't hurt to hold the wires.

As advertised, this is a direct replacement for the complete electronics pack inside your Hubsan. I actually bought it to build a custom micro quad using a small plywood body and some X4 motors. Pairs with the stock transmitter (remote) no problem. I understand that the MOSFETS can handle up to 2A current at 3.7V so possibly slightly bigger coreless motors could be used. If you are new to electronics, you will have to desolder the motor and led leads to remove from your old hubsan body and resolder the new board. Use a low wattage or variable soldering iron and forceps/tweezers also wouldn't hurt to hold the wires.

Come in a nice bag, wait for a frame to test. Good price, come pretty quickly.

Come in a nice bag, wait for a frame to test. Good price, come pretty quickly.

Come in a nice bag, wait for a frame to test. Good price, come pretty quickly.

I replaced the flight controller of the new h107p with this one in order to get rid of the altitude hold and regain the agressive flight control of its predecessor and it works marvelously

I replaced the flight controller of the new h107p with this one in order to get rid of the altitude hold and regain the agressive flight control of its predecessor and it works marvelously

I replaced the flight controller of the new h107p with this one in order to get rid of the altitude hold and regain the agressive flight control of its predecessor and it works marvelously

Cannot get this to bind with 107c + controller, lights just keep flashing blue, please. I need help?

Cannot get this to bind with 107c + controller, lights just keep flashing blue, please. I need help?

Cannot get this to bind with 107c + controller, lights just keep flashing blue, please. I need help?