Todos los mensajes

Krotow Iwanted to change my review, but Banggood doesn't allow to do that. So... Actually if you want to have good SMD tweezer-like solution, either purchase proper tweezers (yes, those are very expensive) or use two soldering irons with T12, C115 or C245 tips. These tweezers use outdated heater and thermocouple ar PCB side combination (bad), needle tips (worse) and tip atjusting simply doesn't work (this drove me nuts almost every time I used these tweezers). Yihua, if you will read this - forget about Hakko 939 cloning. That soldering iron design is horribly outdated. At least upograde to pair of C115 tips, proper power supply and ask your partners in garage Aixun about how they made their T3A/T3B stations.

Krotow 31/08/2018
3
Comentarios (1)

Krotow Adjustingof these two pieces is almost impossible. And when adjusted they dislodge or bend away soon enough. Those tweezer design have so much issues that it is not worth to count them.

ILMGuy99 16/01/2022
1
Comentarios (2)

Krotow Should work over HDMI via any compatible PC monitor. Or over HDMI to USB capture adapter as regular camera in VLC or camera applications.

2022-11-01 07:12:22 Servicial (0)
Enviar
respuestas (2)

Q: Est bien 50 pièces ?

Preguntado por BG521817173 sobre 2022-08-05 04:09:21

Krotow Si.

2022-08-07 04:53:32 Servicial (0)
Enviar
respuestas (2)

Q: Is this in series or parallel please?

Preguntado por FlyingHighh sobre 2022-05-12 02:18:29

Krotow Series.

2022-05-12 03:51:56 Servicial (0)
Enviar
respuestas (1)

Q: can i bind this with emax tinyhawk 2 freestyle?

Preguntado por BG845418144 sobre 2022-03-16 05:10:30

Krotow This is protective silicon shell around Jumper T-Lite transmitter. And not the transmitter itself.

2022-03-16 05:33:47 Servicial (0)
Enviar
respuestas (2)

Krotow Itis more like that batteries are discharging through charger after charging. And batteries should not left unattended connected to charger for entire night anyway.

käsekuchen 22/03/2021
2
Comentarios (2)

Q: How much amps these support through board? 20? 40? 60?

Preguntado por Krotow sobre 2021-12-11 11:08:24

AKNY I would check with your flight controller

2022-01-03 12:35:43 Servicial (0)
Enviar
respuestas (1)

Q: what are the dimensions of the vtx?

Preguntado por wong4can sobre 2022-01-01 03:00:10

Krotow It is a half-triangle from 28.5 x 28.5mm flight controller.

2022-01-02 02:58:25 Servicial (0)
Enviar
respuestas (2)