box was a bit smashed but overall it was a good product as it looks in the picture very happy

box was a bit smashed but overall it was a good product as it looks in the picture very happy

box was a bit smashed but overall it was a good product as it looks in the picture very happy

Really happy with this purchase. alot of metal parts for the money. I've put it through its paces even water and hasn't missed a beat, get one of these whilst you can!!!

Really happy with this purchase. alot of metal parts for the money. I've put it through its paces even water and hasn't missed a beat, get one of these whilst you can!!!

Really happy with this purchase. alot of metal parts for the money. I've put it through its paces even water and hasn't missed a beat, get one of these whilst you can!!!

Very capable RC crawler. But I wanted to make it better so this is what I did. I trimmed the tire to open up the treads. I cut the tire foam into a star pattern to make it perform like a dual density foam. I also added 1.5 oz to each front tire and .75 to the rear tires using ¼ oz wheel weights attached to the rim. I converted the wiring to use a 2s 1100 mah battery that I had for my wltoys A979. Another fun RC. https://www.banggood.com/Wltoys-7_4V-1100mAh-20C-2S-Lipo-Battery-JST-Plug-for-A949-A959-A969-A979-118-RC-Vehicles-p-1557838.html?rmmds=myorder&cur_warehouse=CN . I still get 1 hour of crawling. When you switch to a lipo you need to move the pin connector on the ESC to the lipo slot as seen in the picture with the screwdriver pointing at it. I also converted it to 4 wheel steer using the stock transmitter. In order to convert it I bought a servo plate to mount the servo (amazon redcat 18010), some screws, a steering linkage bar (amazon redcat 18021), a servo https://www.banggood.com/KS-3518-Digital-Servo-20KG-Waterproof-180-Metal-Gear-Large-Torque-For-RC-Robot-Arm-p-1422906.html?rmmds=search&cur_warehouse=CN, a Y servo wire https://www.banggood.com/Amass-15CM-30CM-Y-Servo-Cable-Lead-Splitter-For-JR-Spektrum-HITEC-p-993824.html?ID=3422&cur_warehouse=CN, an inline servo reverse https://www.banggood.com/3_6V-24V-Servo-Signal-Reverse-Support-High-Voltage-Compatible-for-All-Servo-p-1095486.html?rmmds=search&cur_warehouse=CN, and you either need to bend the rear side linkage bars or buy new ones so the rear tires can turn in (amazon redcat 18084). After using it for a while in 4WS with stock transmitter I have decided I want the rear to be selectable. I purchased the FlySky FS-GT5 and I use channel 4 as a thumb control, left center and right switch and it works good for me.

Very capable RC crawler. But I wanted to make it better so this is what I did. I trimmed the tire to open up the treads. I cut the tire foam into a star pattern to make it perform like a dual density foam. I also added 1.5 oz to each front tire and .75 to the rear tires using ¼ oz wheel weights attached to the rim. I converted the wiring to use a 2s 1100 mah battery that I had for my wltoys A979. Another fun RC. https://www.banggood.com/Wltoys-7_4V-1100mAh-20C-2S-Lipo-Battery-JST-Plug-for-A949-A959-A969-A979-118-RC-Vehicles-p-1557838.html?rmmds=myorder&cur_warehouse=CN . I still get 1 hour of crawling. When you switch to a lipo you need to move the pin connector on the ESC to the lipo slot as seen in the picture with the screwdriver pointing at it. I also converted it to 4 wheel steer using the stock transmitter. In order to convert it I bought a servo plate to mount the servo (amazon redcat 18010), some screws, a steering linkage bar (amazon redcat 18021), a servo https://www.banggood.com/KS-3518-Digital-Servo-20KG-Waterproof-180-Metal-Gear-Large-Torque-For-RC-Robot-Arm-p-1422906.html?rmmds=search&cur_warehouse=CN, a Y servo wire https://www.banggood.com/Amass-15CM-30CM-Y-Servo-Cable-Lead-Splitter-For-JR-Spektrum-HITEC-p-993824.html?ID=3422&cur_warehouse=CN, an inline servo reverse https://www.banggood.com/3_6V-24V-Servo-Signal-Reverse-Support-High-Voltage-Compatible-for-All-Servo-p-1095486.html?rmmds=search&cur_warehouse=CN, and you either need to bend the rear side linkage bars or buy new ones so the rear tires can turn in (amazon redcat 18084). After using it for a while in 4WS with stock transmitter I have decided I want the rear to be selectable. I purchased the FlySky FS-GT5 and I use channel 4 as a thumb control, left center and right switch and it works good for me.

Very capable RC crawler. But I wanted to make it better so this is what I did. I trimmed the tire to open up the treads. I cut the tire foam into a star pattern to make it perform like a dual density foam. I also added 1.5 oz to each front tire and .75 to the rear tires using ¼ oz wheel weights attached to the rim. I converted the wiring to use a 2s 1100 mah battery that I had for my wltoys A979. Another fun RC. https://www.banggood.com/Wltoys-7_4V-1100mAh-20C-2S-Lipo-Battery-JST-Plug-for-A949-A959-A969-A979-118-RC-Vehicles-p-1557838.html?rmmds=myorder&cur_warehouse=CN . I still get 1 hour of crawling. When you switch to a lipo you need to move the pin connector on the ESC to the lipo slot as seen in the picture with the screwdriver pointing at it. I also converted it to 4 wheel steer using the stock transmitter. In order to convert it I bought a servo plate to mount the servo (amazon redcat 18010), some screws, a steering linkage bar (amazon redcat 18021), a servo https://www.banggood.com/KS-3518-Digital-Servo-20KG-Waterproof-180-Metal-Gear-Large-Torque-For-RC-Robot-Arm-p-1422906.html?rmmds=search&cur_warehouse=CN, a Y servo wire https://www.banggood.com/Amass-15CM-30CM-Y-Servo-Cable-Lead-Splitter-For-JR-Spektrum-HITEC-p-993824.html?ID=3422&cur_warehouse=CN, an inline servo reverse https://www.banggood.com/3_6V-24V-Servo-Signal-Reverse-Support-High-Voltage-Compatible-for-All-Servo-p-1095486.html?rmmds=search&cur_warehouse=CN, and you either need to bend the rear side linkage bars or buy new ones so the rear tires can turn in (amazon redcat 18084). After using it for a while in 4WS with stock transmitter I have decided I want the rear to be selectable. I purchased the FlySky FS-GT5 and I use channel 4 as a thumb control, left center and right switch and it works good for me.

non ho ancora ricevuto l’oggetto da me ordinato!

non ho ancora ricevuto l’oggetto da me ordinato!

non ho ancora ricevuto l’oggetto da me ordinato!

無事に到着しました。 サスペンションが沈むとボディーフェンダーにタイヤが接触し過ぎがちに成りますので、ボディーシェルをRISE UPする予定です。

無事に到着しました。 サスペンションが沈むとボディーフェンダーにタイヤが接触し過ぎがちに成りますので、ボディーシェルをRISE UPする予定です。

無事に到着しました。 サスペンションが沈むとボディーフェンダーにタイヤが接触し過ぎがちに成りますので、ボディーシェルをRISE UPする予定です。

todo perfecto, envío rapido

todo perfecto, envío rapido

todo perfecto, envío rapido

works great

works great

works great

El cargador viene equivocado, pone que se suministra el Europeo y ha venido con enchufe americano de 2 patillas planas

El cargador viene equivocado, pone que se suministra el Europeo y ha venido con enchufe americano de 2 patillas planas

El cargador viene equivocado, pone que se suministra el Europeo y ha venido con enchufe americano de 2 patillas planas

Luego un como tres dias retrasado pero bien

Luego un como tres dias retrasado pero bien

Luego un como tres dias retrasado pero bien