Emaese
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

Emaese 08/02/2020
Got these to upgrade from Diatone 1105 5500kv. They look pretty good. It has 28awg wire which I though was a little thin but didnt have any motor wire related issues. I'm getting better flight times than I thought I would. From 6min max to 5min but with loads of power. One bad thing though one of the magnets shattered on my second crash :-( I'll take responsibility for that as with the larger motors my frame provides zero protection. These gave my 3" the extra power I was looking for. I always purchase 6 motors at a time. Probably a good idea here if you can afford it. I'm happy with these at 9 bucks each or less. glad I purchased these. I'll post pics side by side with the mamba 1105 so you can compare.
RCINPOWER GTS V2 1207 5000/6000KV 3-4S 7500KV 2-3S Moteur Brushless pour Drone RC de Course FPV
US$12.99 US$21.99
12
Recommandations
Commentaires (0)
Emaese 17/07/2020
overall not a bad frame for the price. Comes with all the air unit mounting bits you'll need. Space IS a little tight for the stack but fits. This worked with the stock dji antennas however I had to flip the air unit upside down to get antennas past the standoffs. Did not work with the strait mmcx dji antennas. So no access to the sd card slot. No big deal for me as I never record strait to air unit. Top mounted battery. Also fits the iflight gopro mounts for Nazgul/DC5. I would buy this again. The carbon has shard edges so be sure to file down a little to avoid cutting wires. Good Luck!
Eachine Wizard X220S HD 5 pouces 220mm Freestyle 5mm Arm Kit de cadre en fibre de carbone compatible DJI FPV Air Unit 20 * 20mm /30.5*30.5mm
US$24.99 US$34.99
3
Recommandations
Commentaires (1)
Emaese 08/02/2020
I couldn't build a better drone for the price. I tend to always cheap out on fpv stuff and end up regretting it. The frame feels sweet. I'm used to the cheap carbon frames with sharp edges and questionable quality. feels better than my own build I've put tons of time into. very smooth and didnt bounce in some decent wind. I look forward to some sweet gopro footage. I've always used runcam swift or foxeer razer more recently but this cam has a nice picture. Switched over to 16:9 . Gonna be hard to use 1800mah 6s, I'm nervous of the props hitting the battery. I may never build another quad again. O e thing though, the screws were way loose, like all over the place. it's hard with the tpu arm guards as you'll be able to tighten the screws until the tpu pinches and breaks. I'm happy with this purchase. R9 Mini installed.
iFlight Nazgul5 227mm 6S 5 pouces FPV Racing Drone BNF/PNP SucceX-E F4 Caddx Ratel/RaceCam R1 Cam 45A BLheli_S ESC 2207 1800KV Moteur
US$239.99 US$263.99
1
Recommandations
Commentaires (0)
Emaese 16/10/2019
works great for my runcan swift micro.
Mini M8 1/3'' 2.1mm FOV 160° Objectif grand angle HD pour caméra FPV
US$10.99 US$13.19
1
Recommandations
Commentaires (0)
Emaese 22/01/2020
I have not used these yet but they look good. I imagine you'll have to insulate these on carbon arms so they will be covered up... hmmm what do with these? Should have thought of that before ordering. I guess it would be good if your props struck the motor wires and sliced them up. I'll use um, eventually...
12 PCS Diatone 40A Plaque d'Extension de Fil de Moteur Brushless pour Drones de Course FPV Multi Rotor RC
US$2.99 US$8.99
1
Recommandations
Commentaires (1)
Emaese 29/10/2019
Got this to keep an eye on my trichomes. It's made of plastic and feels like a toy. However it does do exactly what I need it to. Would buy it again given the need. Cant beat it if you need a cheap microscope. Also has a phone mount that I have yet to try
Microscope biologique monoculaire illuminé pour enfants 100X 400X 1200X Rouge Cadeaux
US$21.99 US$26.99
1
Recommandations
Commentaires (1)
Emaese 17/07/2020
I've had a few of these and they are decent. 2 complaints thought. The lens gets damaged easily and after crashing there are black flakes that stick to the inside of the lens. Happened on 2/3 I purchased. If you need light weight then fine. If I could do it all over I'd spend 10 bucks extra and get Ratels.
Foxeer Razer Micro 1/3 CMOS 1.8mm Objectif 1200TVL Caméra FPV commutable NTSC / PAL 4: 3/16: 9 pour RC Drone
US$21.85 US$29.99
1
Recommandations
Commentaires (0)
Emaese 21/11/2019
Purchased 16:9 version. I currently use runcam swift for most my mini quads. Got this to try out 16x9 video on my sky02c's. I'm glad I did. I didnt realize how distorted the image was on my swifts. I like the 16x9 video. 4:3 seems to be a waste of screen and less immersive. I really dig the video quality of this foxeer(my first). Makes me want to put these on my other builds. This will be my go-to cam from now on. Very slight pink hue though in certain lighting conditions. Turn down the sharpness and your set to go. OH! AND it has the same connection as runcam swift so it was plug and play no soldering. Totally satisfied at it's current price-point.
Foxeer Razer Micro 1/3 CMOS 1.8mm Objectif 1200TVL Caméra FPV commutable NTSC / PAL 4: 3/16: 9 pour RC Drone
US$21.85 US$29.99
10
Recommandations
Commentaires (1)
Emaese 24/02/2019
Overall impressive and you get extras like xt30, wire Nd grommets, extra connection cable. Secure packaging. The pads are VERY small so soldering is a bit tricky. Its also a bit large for a 20×20 board. i would buy this again. Well when it hits that 32.00 price point. Very good value for money.
MAMBA F405 Mini MK2 Betaflight F4 contrôleur de vol et F30 30A/25A 3-4S DSHOT600 FPV Racing Brushless ESC 20 × 20mm pour RC Drone FPV Racing
US$69.99 US$79.99
1
Recommandations
Commentaires (0)
Emaese 08/10/2019
I put these on all my mini quads. 4 wire install and easy betaflight setup. It's cool having speed, altitude, distance home etc. etc. I'll continue to get these as my collection grows
Module d'antenne Dual BN-220 GPS GLONASS de Beitian, niveau TTL, pour drones RC et avions
US$16.00 US$41.59
7
Recommandations
Commentaires (4)
Emaese 26/01/2019
got this to compare to my runcam Swift's. The picture is OKAY. better then AIO but not as good a the swift. I'm getting a pink color to the picture. I'll stick to swift unless I absolutely need this due to size restraints. I give this a 3/5. Not bad, not great.
Caddx Turbo EOS2 4: 3 1200TVL 2.1mm 160 Degrés 1/3 CMOS Mini FPV Caméra NTSC / PAL Pour RC Drone
US$19.99 US$26.39
1
Recommandations
Commentaires (1)
Emaese 17/07/2020
You cant really go wrong with the eco motors. They have held up well. Only damaged one when the screws came out (absolutely my fault) Crashing hurts less when it doesnt code 25 bucks to replace.
Série Emax ECO 2306 6S 1700KV Moteur sans brosse 2433KV 4S pour drone RC FPV
US$15.99 US$19.99
0
Recommandations
Commentaires (0)
Emaese 17/07/2020
Fits the session great. Pretty good print. Dropped the dang ND filter from about 2 feet and it shattered before I could use it....
Pièce de rechange pour drone de course iFlight Nazgul5 227mm 4S 6S pour support de caméra pour Gopro Hero 4/5 Session TPU imprimé en 3D, filtre de protection ND8
US$15.99 US$19.99
0
Recommandations
Commentaires (0)
Emaese 17/07/2020
Best analog fpv cam under $30.00
Caddx Ratel 1 / 1.8 '' Starlight HDR OSD 1200TVL NTSC / PAL 16: 9/4: 3 Caméra FPV avec objectif commutable de 1.66mm / 2.1mm pour RC Drone
US$31.99 US$38.39
0
Recommandations
Commentaires (0)
Kit de cadre de course en fibre de carbone de 5 pouces Papilio 5 220 mm 5 mm Compatible avec l'unité d'air DJI pour drone RC
US$30.99 US$37.99

Q: Tight fit! recommended fC esc

demandé par Emaese sur 2020-05-14 08:50:27

3DFlyZone Skystars 40a Talon (Narrow) ESC`s , i prefer as this lends room to get DVR camera in there easily. Using HAKRC F405 FC , works a treat in conjuction with Matek mini power hub board. plenty room for allsorts in this frame really

2020-06-22 07:35:45 Utile (1)
Soumettre
réponses (2)
Mise à niveau Skystars G730L V2 300mm F4 OSD 50A BL_S 4In1 ESC 3-6S 7 pouces FPV Racing Drone avec caméra Runcam Swift 2 WDR PNP
US$200.99 US$241.99

Q: does the flight controller support sbus

demandé par tommy2 sur 2019-08-15 10:31:28

Emaese Yes. That's what I'm using

2020-04-21 08:27:53 Utile (0)
Soumettre
réponses (1)
Emaese 22/01/2020
Always smart getting a few spares when they are on sale. I like these motors. using 5146 dalprops and can get good flight times even when mashing the throttle. I've only broke one of these and that was my fault (mounting screws were loose and the motor came off the frame.) Likes these so much I also got the 1700kv version. You cant go wrong with these....
Série Emax ECO 2306 6S 1700KV Moteur sans brosse 2433KV 4S pour drone RC FPV
US$15.99 US$19.99
0
Recommandations
Commentaires (0)
Emaese 23/09/2019
you get a lot for the price. Fun to pick locks and practice
Ensemble de 15 crochets de serrure Outil extracteur de clé Pratique de déverrouillage avec Cadenas transparent de pratique
US$9.99 US$16.99
2
Recommandations
Commentaires (0)
Emaese 22/01/2020
I needed these. Hope they last
Ensemble d'outils de 7 tournevis hexagonaux de 1,5/2/2,5/3/4/5,5 mm pour modèles RC
US$13.99 US$16.99
0
Recommandations
Commentaires (0)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe