Livrer à United Kingdom , USD

Reviews des clients

4.93 sur 5
Ecrire un commentaire
  • Tous les Commentaires (286)
  • Image (35)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(286)
    • 5 Étoile(270)
    • 4 Étoile(13)
    • 3 Étoile(2)
    • 2 Étoile(0)
    • 1 Étoile(1)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Works...

    2019-03-11 20:21:07

    I used a DIY Laser Power Meter to do a quick test upon receipt of the Laser. A quick measurement showed 4200mW (4.2 Watts at the meter) output based on the calibration of the Meter I built and calibrated. With further testing it may output a higher value reading. The power output was set by an Eleksmaker Mana SE board and Eleksmaker Evolution Desktop CAM 3.1. It took a long time to get this to the USA. ( 1 month )

    Commentaires (3)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-03-03 10:08:16

    Given that this is a fairly expensive piece of equipment some documentation and a cover to protect the exposed electronics should have been included. Now the good news: With careful focusing (I use a headband magnifier from Banggood, laser goggles and power at 1%) I can get cuts about 0.2mm wide in wood !! When unfocused the beam becomes rectangular. This is my first laser and I bought it to do wood engraving on my 2mx3m homemade cnc. It seems perfect for this application. I have not tried cutting

    Commentaires (2)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-12-08 03:05:31

    Good quality. With this laser module I can engrave anodized aluminum, cut plywood, cardboard or leatherette. 2mm birch plywood cuts in 4 phases at 130mm / min. Air assist is required to cut plywood.

    Commentaires (1)
  • tim
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-04-16 16:56:46

    I am very pleased with this laser. I have mounted it to a MPCNC machine and I have so far engraved photographs on plywood and cut out some intricate parts from 2mm grayboard. It easily cut through 3mm plywood (3 / 4 passes) which is the furthest I've pushed it so far.

    Commentaires
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-09-15 08:57:16

    Very nice module. Cuts balsa up to 6mm, light plywood up to 3mm. Engraving wood is no problem. Ideal for cutting ribs,etc. for model airplanes.

    Commentaires (1)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-09-11 07:15:19

    good

    Commentaires
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-11-10 06:39:43

    Work great with 3D printer. For now I test only cut paper and engraving some wood. For steel is this laser too weak.

    Commentaires (2)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:

    2019-06-23 12:55:21

    Super produit

    Commentaires
  1 2 3 4 5 6 7 8 9 10 ... 36  

Vous pourriez être intéressé par

Enquête de Satisfaction

Téléchargez l'application pour obtenir une exclusivité 10% off coupon