Those antennas are pretty short, exactly 10cm, including the ipex connector. From those 10cm, consider that 3 cm are the exposed wire, if you intend to make those into dipoles, also consider extra 3cm, so you will be left with only 4 cm length wires from the receiver to the place you need to take out of the frame. If you want to have more room, then get the 15cm version. This cable with this connector will fit the Flysky X6B receiver.

Those antennas are pretty short, exactly 10cm, including the ipex connector. From those 10cm, consider that 3 cm are the exposed wire, if you intend to make those into dipoles, also consider extra 3cm, so you will be left with only 4 cm length wires from the receiver to the place you need to take out of the frame. If you want to have more room, then get the 15cm version. This cable with this connector will fit the Flysky X6B receiver.

Those antennas are pretty short, exactly 10cm, including the ipex connector. From those 10cm, consider that 3 cm are the exposed wire, if you intend to make those into dipoles, also consider extra 3cm, so you will be left with only 4 cm length wires from the receiver to the place you need to take out of the frame. If you want to have more room, then get the 15cm version. This cable with this connector will fit the Flysky X6B receiver.

Very nice easy to change the anteanna on anything that has U-fl ( Ipex) connector. It is a good quality standard antenna. Just keep in mind that these come with the old IPEX connecters. FrSky has changed to a smaller type on the new connectors so these do not fit the latest models of the X4R-SB.

Very nice easy to change the anteanna on anything that has U-fl ( Ipex) connector. It is a good quality standard antenna. Just keep in mind that these come with the old IPEX connecters. FrSky has changed to a smaller type on the new connectors so these do not fit the latest models of the X4R-SB.

Very nice easy to change the anteanna on anything that has U-fl ( Ipex) connector. It is a good quality standard antenna. Just keep in mind that these come with the old IPEX connecters. FrSky has changed to a smaller type on the new connectors so these do not fit the latest models of the X4R-SB.

My antennas were too long 23mm for 2.4ghz reception with the Flysky receiver. I had to cut them down to make them work with the Flysky X6B receiver..... If you own these Flysky receivers make sure you check the antenna beforehand or your reception will be terrible. It's not a big deal as it's really easy to trim the antenna's but people need to know this beforehand. The Flysky receiver is 23mm long, these are 30.

My antennas were too long 23mm for 2.4ghz reception with the Flysky receiver. I had to cut them down to make them work with the Flysky X6B receiver..... If you own these Flysky receivers make sure you check the antenna beforehand or your reception will be terrible. It's not a big deal as it's really easy to trim the antenna's but people need to know this beforehand. The Flysky receiver is 23mm long, these are 30.

My antennas were too long 23mm for 2.4ghz reception with the Flysky receiver. I had to cut them down to make them work with the Flysky X6B receiver..... If you own these Flysky receivers make sure you check the antenna beforehand or your reception will be terrible. It's not a big deal as it's really easy to trim the antenna's but people need to know this beforehand. The Flysky receiver is 23mm long, these are 30.

Well, you do FPV racing ? So you may crash sometimes .... :). And so you will destroy your receiver antennas. This is a cheap replacement for them. I use this for the Flysky X6B receiver (or A8S also), and it fits well. Just need to shorten them to 23mm for Flysky product as they use a different wave length (versus 31mm for "regular " 2.4Ghz receiver)

Well, you do FPV racing ? So you may crash sometimes .... :). And so you will destroy your receiver antennas. This is a cheap replacement for them. I use this for the Flysky X6B receiver (or A8S also), and it fits well. Just need to shorten them to 23mm for Flysky product as they use a different wave length (versus 31mm for "regular " 2.4Ghz receiver)

Well, you do FPV racing ? So you may crash sometimes .... :). And so you will destroy your receiver antennas. This is a cheap replacement for them. I use this for the Flysky X6B receiver (or A8S also), and it fits well. Just need to shorten them to 23mm for Flysky product as they use a different wave length (versus 31mm for "regular " 2.4Ghz receiver)

كل هوائي معبأ في كيس منفصل جودة جيدة.

Each antenna packed in a separate bag. Good quality.

كل هوائي معبأ في كيس منفصل جودة جيدة.

الهوائي طبيعي. أعتقد أنها ستعمل بشكل جيد.

Антенки нормальные. Думаю будут работать хорошо

الهوائي طبيعي. أعتقد أنها ستعمل بشكل جيد.

لا توجد أخطاء حتى الآن (^-^)

今のところ不具合なし(^-^)

لا توجد أخطاء حتى الآن (^-^)

رخيص!(^-^) شراء الآن للمخزون (^-^)

安い！(^-^) とりあえずストック用に購入(^-^)

رخيص!(^-^) شراء الآن للمخزون (^-^)

الهوائيات قصيرة تبدو جيدة.

Антенны короткие, имейте в виду. С виду хорошие.

الهوائيات قصيرة تبدو جيدة.

Spare parts

Spare parts

Spare parts