Todos los mensajes

maetty Use OpenGD77-Firmware and CPS. It worked much better: Google for "openGD77" and "firmware".

2023-08-11 06:07:45 Servicial (1)
Enviar
respuestas (1)

Erwin 1): Turn off the device, Press P4+FUNC+POWER ON KEY (at the same time press 3 keys), then power on. 2): Rotate the channel knob to Choose to Mode menu 3) Press and hold PTT key on the external speaker mic. MODE no. Change to blue color, then rotate the channel knob to choose the frequency band you need. When you choose Mode 2,then you can use the full frequency. 136-174 MHz and 400-490MHz. 4)Turn off the device, then turn on again. Will be the new frequency band you setted.

2023-06-17 09:12:21 Servicial (0)
Enviar
respuestas (2)

Q: does it have Tier 1 and TIER 2 ?

Preguntado por Erwin sobre 2023-06-17 08:24:27

The seller Baofeng DM-1720 ,You can refer to the manual

2023-06-18 08:37:56 Servicial (0)
Enviar
respuestas (1)

Erwin Hello,the G jack is for the external trigger function of your oscilloscope. Regards,Erwin

Grandpa 25/08/2022
4
Comentarios (2)