Meilleures offres pour - Achats en ligne Banggood Array

jiribekr 27/07/2020

I got this multimeter for basic repairs when my profi amprobe multimeter just isn't good enough and I need to see oscilloscope. Voltage, freq and duty cycle work great with absolute accuracy. Resistance and capacity is also measured exactly, But amperes have cca 1% error, so that's not great and not terrible. The test leads howerer won't withstand 10A, they get really hot, I recommend buying better leads. mA measurement is accurate. Multimeter has HOLD function with small window that shows actual value. P-H mode can be started or stopped and records max and min. REL mode does offset and tells you the offset value at the bottom. These are very handy functions. Range is default auto, but can be set manually. Oscilloscope function works well and has functions like Vp-p, Vrms, Vavg, Hz, +Vp, -Vp and duty cycle just at the bottom of the screen. It has trigger with rising/fading, auto/single/normal and level settings. Volt/div and tim/div can be manually adjusted. It also has autoset. If you press hold, you can use V and T cursors or store it. Memory for scope images and multimeter values comes handy, but can't be exported unfortunately. What manual does not say that if you turn it on while holfing F4, it goes in silent mode. LCD screen is just basic, with poor viewing angles, but resolution is good enough. It comes with soft pouch, leads, temp sensor and manual I really needed to have read to access all the functions. I recommend this product

MUSTOOL MDS8207 Oscilloscope Numérique Intelligent 2 en 1 40MHz 200Msps/S Multimètre True RMS 6000 Comptes

60,88€ 101,47€

29

Commentaires (4)

jiribekr 14/07/2020

I decided to buy this camera because I am electrician and reviewing some power switching units under load with thermal camera is sometimes a must. Also I sometimes need to check whether integrated circuit gets hot or not. This camera covers it pretty well. I got it in rectangle pouch with colorful english manual and 8GB uSD card "SanDisk Edge 8GB class 4" with cca 5MB/s bandwidth and 2 bad sectors, but useful for this camera. Just beware this camera does take photos in BMP only. I would welcome function to draw contrast lines from regular camera to thermal camera, just for better accuracy. Ability to choose infrared overlay over normal image is really useful. Also interface is not that responsive and browsing images with device does have some bugs, but generally it works as it should, mainly for its price.

XINTEST HT02 Caméra thermographique portable Caméra thermique infrarouge Image numérique infrarouge Testeur de température avec écran LCD couleur 2,4 pouces

156,83€

15

Commentaires (2)

DL24M-H 2-200V 600W 3mA-40A Indicateur de tension de charge électronique Power Bank Batterie Testeur 18650 Pack Capacité Moniteur Checker Tool

40,58€ 55,34€

Q: Hello, I purchased 600W version, and in 1mA precision mode, the load has huge current error. eg.: I set for 10mA, actual current is 12mA. Is there a calibration and adjustment menu? And how do I access it? Many thanks

demandé par jiribekr sur 2022-08-26 03:20:09

The seller Hello friends, have you adjusted the small current measurement mode? For more inquiries, you can contact our customer service. https://www.banggood.com/Contact-Us_hi111

2022-08-28 10:07:27 Utile

Soumettre

réponses (1)

Scie à chaîne électrique de 4 pouces 800W pour scier les bûches à la main pour batterie Makita18V-21V

30,44€ 47,96€

Q: Hello, please where can I buy file for chain sharpening? My 4,5mm and 4mm files are too big for this chain. The chain is already blunt after discharging two batteries and I need to sharpen it.

demandé par jiribekr sur 2021-09-05 10:01:00

marcelo_barbosa ok

2022-01-22 10:01:49 Utile

Soumettre

réponses (2)

ANENG AN870 Multimètre Numérique à Plage Automatique de Précision 19999 Comptes True-RMS NCV Ohmmètre Testeur

31,36€ 54,42€

Q: Does continuity testing have a tone?

demandé par BG411737232 sur 2021-12-19 05:24:35

jiribekr Yes, and the reaction is fast

2021-12-19 06:13:04 Utile

Soumettre

réponses (5)

Scie à chaîne électrique de 4 pouces 800W pour scier les bûches à la main pour batterie Makita18V-21V

30,44€ 47,96€

Q: ¿ Que tipo de baterías usa? ¿ Valdrían las típicas antiguas de Bosch?

demandé par ullu28 sur 2021-10-22 10:27:33

jiribekr Makita 18V LXT

2021-10-22 10:35:58 Utile (1)

Soumettre

réponses (8)

Scie à chaîne électrique de 4 pouces 800W pour scier les bûches à la main pour batterie Makita18V-21V

30,44€ 47,96€

Q: I would like a manual to go with this please-how may I acquire one?

demandé par retro-grrl sur 2021-08-26 12:58:46

jiribekr There is absolutely no manual needed. Everything is easy. Just keep in mind to mount chain correctly and not backwards, that's all.

2021-08-27 11:32:23 Utile

Soumettre

réponses (5)

jiribekr One more thing I figured out. If you set trigger to rising and below 10V, it will trigger always immediately, even if you short the terminals. This is error, so be informed before buying.

jiribekr 27/07/2020

I got this multimeter for basic repairs when my profi amprobe multimeter just isn't good enough and I need to see oscilloscope. Voltage, freq and duty cycle work great with absolute accuracy. Resistance and capacity is also measured exactly, But amperes have cca 1% error, so that's not great and not terrible. The test leads howerer won't withstand 10A, they get really hot, I recommend buying better leads. mA measurement is accurate. Multimeter has HOLD function with small window that shows actual value. P-H mode can be started or stopped and records max and min. REL mode does offset and tells you the offset value at the bottom. These are very handy functions. Range is default auto, but can be set manually. Oscilloscope function works well and has functions like Vp-p, Vrms, Vavg, Hz, +Vp, -Vp and duty cycle just at the bottom of the screen. It has trigger with rising/fading, auto/single/normal and level settings. Volt/div and tim/div can be manually adjusted. It also has autoset. If you press hold, you can use V and T cursors or store it. Memory for scope images and multimeter values comes handy, but can't be exported unfortunately. What manual does not say that if you turn it on while holfing F4, it goes in silent mode. LCD screen is just basic, with poor viewing angles, but resolution is good enough. It comes with soft pouch, leads, temp sensor and manual I really needed to have read to access all the functions. I recommend this product

MUSTOOL MDS8207 Oscilloscope Numérique Intelligent 2 en 1 40MHz 200Msps/S Multimètre True RMS 6000 Comptes

60,88€ 101,47€

29

Commentaires (4)

jiribekr 12/09/2020

I bought this watch because it is the first smartwatch ever, that looks like normal men watches and not watches for 2% of population. First thing - it is so lightweight, the strap is some kind of silicone, that is flexible as hell, still it holds great. Pairing with my Asus ZenFone 6 was quick and amazfit app (renamed to Zepp) allowed me to quickly set it up. After some updates, it computes steps as it should. Heartbeat measurement is sometimes inaccurate, I recommend tightening the strap a little bit more. Unfortunately, original app has ugly watch faces available, but app called amazfaces solves it. I like the flashlight function, like if you had pipboy from fallout. I have it constantly connected to my phone and recharge it every two weeks. Battery would last three weeks of normal usage. There are some minor problems I would like to see solved, but overall I am happy with it.

[Bluetooth 5.0] Amazfit T-Rex AMOLED GPS + GLONASS Outdoor Watch 14 Modes sportifs Suivre les prévisions météorologiques Montre intelligente Global Version

131,04€ 157,75€

16

Commentaires (4)

[Bluetooth 5.0] Amazfit T-Rex AMOLED GPS + GLONASS Outdoor Watch 14 Modes sportifs Suivre les prévisions météorologiques Montre intelligente Global Version

131,04€ 157,75€

Q: Does it have sleep monitoring?

demandé par Péter sur 2021-03-26 02:29:49

jiribekr Yes, it monitors bpm and analyzes sleep depth

2021-03-27 02:15:03 Utile (1)

Soumettre

réponses (1)

jiribekr 02/01/2021

The drive is fast and definitely not fake. I cut off the strap and put it in my car. The small dimensions are great for car radios, so people won't kick it with knees.

Xiaomi Mijia USB3.0 Flash Lecteur 64G Disque USB portable 124 Mo / s disque U Mémoire Clé USB avec design de lanière de mode portable

25,82€ 31,36€

0

Commentaires (0)

Station de soudage numérique V2.1S T12 Contrôleur de température Station de soudage électrique Fer à souder T12-K + Poignée 907

46,12€ 71,03€

Q: does this come available for UK plug ?

demandé par BG545341663 sur 2020-10-21 12:03:37

jiribekr It has regular connector you can find on monitor, PC or some other devices (oscilloscopes, bench power supplies and such). So it is up to you what cable do you connect to it.

2020-10-21 12:22:51 Utile

Soumettre

réponses (3)

jiribekr 06/10/2020

To be honest, I didn't expect that much, but actually it is quite a fortune. I've been working with soldering iron that has just digital temp regulation and uses 900M tips. Also I sometimes use gas powered soldering iron when socket is not available. And the third soldering iron I was using was transformer iron for huge materials. This soldering iron is accurate enough to solder AMD without any problems, just like soldering big and hard to heat up things like 16mm2 wire. Just keep in mind to buy set of tips. This solder came with K tip great for tinning wires. Then I use BC1 for THT/bigger SMD and BC3 for huge things. I must say that this iron is joy to use. It heats up quickly, keeps temperature no matter what and also has great functions. Even compared to one profi I soldered with, this one is definitely better. I recommend buying more tips and pen stand.