Avión de entrenamiento Swallow FPV de ala fija de 800 mm de envergadura de EPP para principiantes
Una parte de la reseña se ha traducido automáticamente.
Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.
nice epp lots of carbon, only thing where is the COG?
Gran ala fácil de montar muy estable, si el uso de la batería 550 y 850 no necesita buscar CG y la batería que uso vuela mucho fue con esta batería 550 y 850, sólo tenga cuidado de no volar donde mucho viento puede vibrar o flambar, tou satisfecho
Exelente avión para un principiante. La construcción tardó 10 minutos. Parece bastante robusto. Utilizado un micro esc, 12a esc, 2280kv racetar, 3 palas de 4 pulgadas de prop, 800mah 2s y vuela bien rápido y lento. pero con poco poder. Ala recortada con cuchillo para reducir el arrastre. Necesidad de pintar un lado para ayudar con la orientación
Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.
Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.
Parque Perfekt flyer lento, muy robusto!
Buen embalaje. Kit simple pero bien
https://www.youtube.com/watch?v=edviFjZatoE
Esto es amigable para principiantes con peso ligero