value for money great lcd s I m reqlly satisfied (they arent scratches they are from the protective plastic )

value for money great lcd s I m reqlly satisfied (they arent scratches they are from the protective plastic )

value for money great lcd s I m reqlly satisfied (they arent scratches they are from the protective plastic )

Just grab NewLiquidCrystal and connect SDA/SCL to A4/A5. You can look at the examples from the library. But initialize with: LiquidCrystal_I2C lcd(0x3f, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); as the backlight has a jumper and starts on but you can control it with the lcd.Backlight(...) function.

Just grab NewLiquidCrystal and connect SDA/SCL to A4/A5. You can look at the examples from the library. But initialize with: LiquidCrystal_I2C lcd(0x3f, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); as the backlight has a jumper and starts on but you can control it with the lcd.Backlight(...) function.

Just grab NewLiquidCrystal and connect SDA/SCL to A4/A5. You can look at the examples from the library. But initialize with: LiquidCrystal_I2C lcd(0x3f, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); as the backlight has a jumper and starts on but you can control it with the lcd.Backlight(...) function.

Bought 6 sets of 5 (total 30 units) for a class I will be teaching. Banggood advised me that they were out of stock but would be available in 10 days. They asked if I wanted to cancel the order or wait. I chose to wait. Eight days later an email notified me that they would be shipped by express mail. I received them in good order 18 days after I ordered them. Very good! Thank you Banggood. Please note that the I2C address for these units is 3F. They are 5Volt units so you must use a bi-directional level converter like product 951145 if you use an ESP8266 or other 3.3V MCU.

Bought 6 sets of 5 (total 30 units) for a class I will be teaching. Banggood advised me that they were out of stock but would be available in 10 days. They asked if I wanted to cancel the order or wait. I chose to wait. Eight days later an email notified me that they would be shipped by express mail. I received them in good order 18 days after I ordered them. Very good! Thank you Banggood. Please note that the I2C address for these units is 3F. They are 5Volt units so you must use a bi-directional level converter like product 951145 if you use an ESP8266 or other 3.3V MCU.

Bought 6 sets of 5 (total 30 units) for a class I will be teaching. Banggood advised me that they were out of stock but would be available in 10 days. They asked if I wanted to cancel the order or wait. I chose to wait. Eight days later an email notified me that they would be shipped by express mail. I received them in good order 18 days after I ordered them. Very good! Thank you Banggood. Please note that the I2C address for these units is 3F. They are 5Volt units so you must use a bi-directional level converter like product 951145 if you use an ESP8266 or other 3.3V MCU.

è arrivato molto prima del previsto, come sotto 7 giorni. qualità impressionante. Sono davvero felice con il mio acquisto. ❤ BANGGOOD ❤

arrived alot sooner than expected, like under 7 days. awesome quality. I'm really happy with my purchase. ❤BANGGOOD❤

è arrivato molto prima del previsto, come sotto 7 giorni. qualità impressionante. Sono davvero felice con il mio acquisto. ❤ BANGGOOD ❤

Useful for projects

Useful for projects

Useful for projects

Good LCD serial displays, I needed to set the LCD I2C address to 0x3F to get my displays working Vincent Australia

Good LCD serial displays, I needed to set the LCD I2C address to 0x3F to get my displays working Vincent Australia

Good LCD serial displays, I needed to set the LCD I2C address to 0x3F to get my displays working Vincent Australia

I am very satisfied with the purchase I highly recommend this product

I am very satisfied with the purchase I highly recommend this product

I am very satisfied with the purchase I highly recommend this product

Requires lib from https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads/ addr of my displays is 0x27 - use I2C Scanner. Display must by initialised as LiquidCrystal_I2C lcd(0x27,2,1,0,4,5,6,7,3, POSITIVE); && lcd.begin(16,2); After that works like charm ... M.

Requires lib from https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads/ addr of my displays is 0x27 - use I2C Scanner. Display must by initialised as LiquidCrystal_I2C lcd(0x27,2,1,0,4,5,6,7,3, POSITIVE); && lcd.begin(16,2); After that works like charm ... M.

Requires lib from https://bitbucket.org/fmalpartida/new-liquidcrystal/downloads/ addr of my displays is 0x27 - use I2C Scanner. Display must by initialised as LiquidCrystal_I2C lcd(0x27,2,1,0,4,5,6,7,3, POSITIVE); && lcd.begin(16,2); After that works like charm ... M.

Very good quality. Usefull because you spare outputs (2 wire + power instead 10 wires for regular 16x2 LCD display). Beware to set the contrast during first use!

Very good quality. Usefull because you spare outputs (2 wire + power instead 10 wires for regular 16x2 LCD display). Beware to set the contrast during first use!

Very good quality. Usefull because you spare outputs (2 wire + power instead 10 wires for regular 16x2 LCD display). Beware to set the contrast during first use!

Great set for the price - well done soldering and good packing. Don't forget to set the contrast at first use!

Great set for the price - well done soldering and good packing. Don't forget to set the contrast at first use!

Great set for the price - well done soldering and good packing. Don't forget to set the contrast at first use!