Recenzje Zestaw 3 sztuk Geekcreit® DIY Shaking Blue LED z małym silnikiem wibracyjnym - Banggood zakupy online

Zestaw 3 sztuk Geekcreit® DIY Shaking Blue LED z małym silnikiem wibracyjnym

US$8.99
~~US$16.99~~
Kup Teraz

Opinie klientów

4.45 z5

Zobacz wszystkie recenzje w22

5 gwiazda
17 (77.3%)
4 gwiazda
1 (4.5%)
3 gwiazda
2 (9.1%)
2 gwiazda
1 (4.5%)
1 gwiazda
1 (4.5%)

Napisać recenzję Uzyskaj podwójne oceny, jeśli jesteś jedną z pierwszych 3 opublikowanych recenzji!

Wszystkie recenzje(22)
Obrazy
Wideo(0)
Wszystkie gwiazdy
- Wszystkie gwiazdy(22)
- 5 Gwiazda(17)
- 4 Gwiazda(1)
- 3 Gwiazda(2)
- 2 Gwiazda(1)
- 1 Gwiazda(1)

Sortuj według:

Do podglądu

Do podglądu
Najbardziej pomocny
Najnowszy

Recenzje tylko z Twojego kraju (United States)

|

Pokaż oryginał

Część recenzji została przetłumaczona automatycznie.

BillthetoolmanVIP2
US
15/11/2017

I must be doing something completely wrong building these units. 2 out of 15 that I built so far do not work currently. They do turn on. The vibrating motor doesn’t vibrate. The number 5 is the only pattern provide by the LEDs. I’m an expert soldering technicians, so ever solder joint is good. All the components are positioned in correctly. No solder shorts. The CR2032 batteries are new. The second one that I assembled, I placed the chip in a IC socket to find out where the problem could be. Thinking of taking the chips from the other kits and test them.

I must be doing something completely wrong building these units. 2 out of 15 that I built so far do not work currently. They do turn on. The vibrating motor doesn’t vibrate. The number 5 is the only pattern provide by the LEDs. I’m an expert soldering technicians, so ever solder joint is good. All the components are positioned in correctly. No solder shorts. The CR2032 batteries are new. The second one that I assembled, I placed the chip in a IC socket to find out where the problem could be. Thinking of taking the chips from the other kits and test them.

I must be doing something completely wrong building these units. 2 out of 15 that I built so far do not work currently. They do turn on. The vibrating motor doesn’t vibrate. The number 5 is the only pattern provide by the LEDs. I’m an expert soldering technicians, so ever solder joint is good. All the components are positioned in correctly. No solder shorts. The CR2032 batteries are new. The second one that I assembled, I placed the chip in a IC socket to find out where the problem could be. Thinking of taking the chips from the other kits and test them.
2

Komentarze (1)

Pokaż oryginał
exequielVIP5
NO
10/10/2018

well made product,Fun to assemble and as described

well made product,Fun to assemble and as described

well made product,Fun to assemble and as described
0

Komentarze

Pokaż oryginał

Show:

Całkowity 0 stron

Idź do strony

Iść

Możesz być zainteresowany

recommendation for you