EXUAV 2-6S DC-DC Konverter Abwärtsmodul 5V / 12V BEC Ausgang 15x8mm für FPV Renndrohne
Ein Teil der Rezension wurde automatisch übersetzt.
Giving 12V, taking 5V, and drawing these currents from the output, the device temperature was getting at: 2.20A >100°C 1.52A 75.6°C 1.04A 56.6°C Room temperature was at 27°C. This is without any heat sink (and with low heat dissipation through the soldered leads (the amount of which is 4), because I made them not thick). You will keep it in a somewhat better conditions if either the current will not be so high or you'd make a thermal contact of it with some colder plate.
Дешевый и очень компактный бэк. Подойдет на мелколет. Фото в сравнении с популярным bec от matek
I use it for my mini cam. very small tool
beautiful 👌
molto piccolo ma sembra ben fatto......
good
Parfait
It is really small and lightweight. So far, so good.
Очень мелкий модуль.
What the title says. It's so small that it's difficult to read the silkscreen text on the board without a magnifying glass.