Very happy with this. Its quite small, so easy to carry. Works fine out of the box, and comes in a travel pouch with lead and temp probe. I've tested up to 12A on 240V AC, checked 50Hz, measured up to 415V three phase and up to 24V on DC, and measured up to 12Amps on AC. The continuity test buzzer is loud enough when measuring ohms. (I haven't tried the capacitance or diode test mode yet). Its auto ranging, so very easy to use. In auto mode, if the test leads are not in - its expecting Amps, if they are in, its expecting Ohms, but if it sees a voltage - it reads Volts AC or DC. If you press the red button, it reads temp in C. The temp probe is handy, I've had it up to 230C. As a multi-meter, it compares well with my calibrated fluke 322. The non contact voltage mode works ok but its a bit clunky - you have to hold the blue key down to do a non contact voltage check. The only minor niggle is that the screen is not backlit, but you can press the side hold button to freeze the display. Needs 2x AAA batteries (not supplied). Can't really fault it for the money. Great as a back up or spare to keep handy. I don't think it measures DC Amps but I would never need to measure DC amps,

Very happy with this. Its quite small, so easy to carry. Works fine out of the box, and comes in a travel pouch with lead and temp probe. I've tested up to 12A on 240V AC, checked 50Hz, measured up to 415V three phase and up to 24V on DC, and measured up to 12Amps on AC. The continuity test buzzer is loud enough when measuring ohms. (I haven't tried the capacitance or diode test mode yet). Its auto ranging, so very easy to use. In auto mode, if the test leads are not in - its expecting Amps, if they are in, its expecting Ohms, but if it sees a voltage - it reads Volts AC or DC. If you press the red button, it reads temp in C. The temp probe is handy, I've had it up to 230C. As a multi-meter, it compares well with my calibrated fluke 322. The non contact voltage mode works ok but its a bit clunky - you have to hold the blue key down to do a non contact voltage check. The only minor niggle is that the screen is not backlit, but you can press the side hold button to freeze the display. Needs 2x AAA batteries (not supplied). Can't really fault it for the money. Great as a back up or spare to keep handy. I don't think it measures DC Amps but I would never need to measure DC amps,

Very happy with this. Its quite small, so easy to carry. Works fine out of the box, and comes in a travel pouch with lead and temp probe. I've tested up to 12A on 240V AC, checked 50Hz, measured up to 415V three phase and up to 24V on DC, and measured up to 12Amps on AC. The continuity test buzzer is loud enough when measuring ohms. (I haven't tried the capacitance or diode test mode yet). Its auto ranging, so very easy to use. In auto mode, if the test leads are not in - its expecting Amps, if they are in, its expecting Ohms, but if it sees a voltage - it reads Volts AC or DC. If you press the red button, it reads temp in C. The temp probe is handy, I've had it up to 230C. As a multi-meter, it compares well with my calibrated fluke 322. The non contact voltage mode works ok but its a bit clunky - you have to hold the blue key down to do a non contact voltage check. The only minor niggle is that the screen is not backlit, but you can press the side hold button to freeze the display. Needs 2x AAA batteries (not supplied). Can't really fault it for the money. Great as a back up or spare to keep handy. I don't think it measures DC Amps but I would never need to measure DC amps,

não lê DCA

ne očitava DCA

não lê DCA