Alle meddelelser

Q: What is the maximum load weight that an be put on the desk safely?

spurgt af garry_burns på 2022-05-09 03:20:47

The seller Usually up to 80kg

2022-05-30 09:28:04 Nyttig (0)
Indsend
svar (1)

garry_burns The transmitter cannot be converted between Mode 1 and Mode 2 in software. You need to buy the correct Mode transmitter or you will have to physically swap the gimbals.

2021-10-25 03:21:34 Nyttig (0)
Indsend
svar (3)

garry_burns Yes, worked perfectly fine on Windows 10. Used it with an old copy of RealFlight and Phoenix and all worked after calibration. Make sure you select the correct slider position.

2021-06-23 08:33:22 Nyttig (0)
Indsend
svar (1)

garry_burns I can't comment on voltage levels as I've only tried my old RealFlight Lite transmitter and JR 35Mhz and TX16 2.4GHz transmitters. All these work fine after re-calibration with the Windows USB diver and in Phoenix. The button on the USB dongle is to reset it between switching between the difference flight simulators with the sliding switch but I find it more reliable to unplug and re-plug it.

2021-04-05 03:42:07 Nyttig (0)
Indsend
svar (1)

garry_burns Those dimensions can't be correct if this is to fit the E160. The battery supplied with the E160 is 54 x 23 x 15 (mm) so much smaller than this one.

2020-12-08 05:08:43 Nyttig (2)
Indsend
svar (2)

Q: Will this wrench work with a standard M2 tap?

spurgt af garry_burns på 2020-10-24 04:39:48

HunniePie https://www.banggood.com/Drillpro-6pcs-M4-M12-Thread-Tap-Hand-Tap-with-Tap-Wrench-Combination-Thread-Tap-Drill-Bit-Adjustable-Tapping-Tool-p-1737410.html?rmmds=category&cur_warehouse=CN

2020-10-29 10:03:51 Nyttig (0)
Indsend
svar (1)