I ordered these so that I would have plenty of overhead for my build. I did not know how large they were! 80x26x8mm with 65mm motor leads, 70mm power leads, and 190mm servo lead. They weigh in at 30g, less than the stated 35g. There are 2 capacitors on the circuit board next to the power leads.

I ordered these so that I would have plenty of overhead for my build. I did not know how large they were! 80x26x8mm with 65mm motor leads, 70mm power leads, and 190mm servo lead. They weigh in at 30g, less than the stated 35g. There are 2 capacitors on the circuit board next to the power leads.

I ordered these so that I would have plenty of overhead for my build. I did not know how large they were! 80x26x8mm with 65mm motor leads, 70mm power leads, and 190mm servo lead. They weigh in at 30g, less than the stated 35g. There are 2 capacitors on the circuit board next to the power leads.

Ок:)

Ок:)

Ок:)

não testei ainda mas parece ser Bom chegou tranquilo no Brasil demorou um pouco mas Ok

não testei ainda mas parece ser Bom chegou tranquilo no Brasil demorou um pouco mas Ok

não testei ainda mas parece ser Bom chegou tranquilo no Brasil demorou um pouco mas Ok

nice esc's perfect for quadcopters 450 and above

nice esc's perfect for quadcopters 450 and above

nice esc's perfect for quadcopters 450 and above

комплектность и качество соответствует описанию. рекомендую продавца:)

комплектность и качество соответствует описанию. рекомендую продавца:)

комплектность и качество соответствует описанию. рекомендую продавца:)

Towar zgodny z opisem. Wszystko OK.

Towar zgodny z opisem. Wszystko OK.

Towar zgodny z opisem. Wszystko OK.

Looking for a cheap affordable ESC with Simonk firmware? This will not go wrong. I am using 30A version of this on my Tarot 650 Ironman and 2212 810KV Racerstars motor. Flew for 10 mins with 1.8 KG weight and it's only luke warm. The ambient temperature was 30 degrees here. No complaints and I would recommend it!

Looking for a cheap affordable ESC with Simonk firmware? This will not go wrong. I am using 30A version of this on my Tarot 650 Ironman and 2212 810KV Racerstars motor. Flew for 10 mins with 1.8 KG weight and it's only luke warm. The ambient temperature was 30 degrees here. No complaints and I would recommend it!

Looking for a cheap affordable ESC with Simonk firmware? This will not go wrong. I am using 30A version of this on my Tarot 650 Ironman and 2212 810KV Racerstars motor. Flew for 10 mins with 1.8 KG weight and it's only luke warm. The ambient temperature was 30 degrees here. No complaints and I would recommend it!

super cool 40 a ESC but it is without correctors you have to buy and solder them yourself

super cool 40 a ESC but it is without correctors you have to buy and solder them yourself

super cool 40 a ESC but it is without correctors you have to buy and solder them yourself

pros: cheap and well constructed cons: bigger than other on the market

pros: cheap and well constructed cons: bigger than other on the market

pros: cheap and well constructed cons: bigger than other on the market

Греются не сильно, работают нормально, нужно докупать коннекторы.

Греются не сильно, работают нормально, нужно докупать коннекторы.

Греются не сильно, работают нормально, нужно докупать коннекторы.