Recenze TWO TREES® Černý / Stříbrný 2040 Y-Os synchronního pásu s napínákem Sada hliníkového profilu pro 3D tiskárna díly - Banggood Česko online nakupování

TWO TREES® Černý / Stříbrný 2040 Y-Os synchronního pásu s napínákem Sada hliníkového profilu pro 3D tiskárna díly

US$7.30
~~US$27.00~~
Kup nyní

Hodnocení zákazníků

4.91 z5

Zobrazit všechny recenze11

5 hvězda
10 (90.9%)
4 hvězda
1 (9.1%)
3 hvězda
0 (0%)
2 hvězda
0 (0%)
1 hvězda
0 (0%)

Napsat recenzi Získejte dvojité body, pokud jste jedním z prvních 3 recenzí publikovaných!

Všechny recenze(11)
Snímky
Video(0)
Hvězdný
- Hvězdný(11)
- Hvězda 5(10)
- Hvězda 4(1)
- Hvězda 3(0)
- Hvězda 2(0)
- Hvězda 1(0)

Seřazeno podle:

Nejlepší recenze

Nejlepší recenze
Nejvíce užitečné
Nejnovější

Recenze pouze z vaší země (United States)

|

Ukázat originál

Část recenze byla přeložena automaticky.

top_171VIP3
BR
23/06/2021

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.

Veio ok, bem embalado, produto original! Ainda não instalei, mas assim que instalar se houver novidades altero o review.
0

Komentáře

Ukázat originál
BG574810573VIP3
GB
27/10/2020

cannot fault works easy to install

cannot fault works easy to install

cannot fault works easy to install
0

Komentáře

Ukázat originál
Hamza KosmaVIP1
TR
01/06/2021

ürün kaliteli ve işlevsel, tavsiye ederim.

ürün kaliteli ve işlevsel, tavsiye ederim.

ürün kaliteli ve işlevsel, tavsiye ederim.
0

Komentáře

Ukázat originál
AndiMVIP5
DE
10/02/2021

Good product for a litte fortune.

Good product for a litte fortune.

Good product for a litte fortune.
0

Komentáře

Ukázat originál
dpepereVIP3
CA
06/11/2020

tel que décrit

tel que décrit

tel que décrit
0

Komentáře

Ukázat originál
dario
AE
04/11/2020

Good quality, thanks

Good quality, thanks

Good quality, thanks
0

Komentáře

Ukázat originál
KevinMcD1386VIP2
US
27/10/2020

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back

really nice and well made be prepared to make a longer belt as the tensioner sits fairly far back
0

Komentáře

Ukázat originál
MarkusVIP3
CH
01/02/2020

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).

This tentioner is not 1:1 copatible to Creality CR10S (asuming also not to CR10). The stock belt is to short to go arround the pulley when you try to use the tentioning screw delivered with the kit. I had to use an other tentionscrew with about + 5 mm length, in addition I had to cut out the legs about 10 mm to get the pulley closer to the 40x20 frame end. So if you want to use the tentioner here with the mentioned printers you need to modify the tentioner or buy a longer y-axis belt (about + 20 mm). Overall the quality of the tentioner is great, the delivery time was accepteable and the mouting procedure easy (after doing the mod).
0

Komentáře

Ukázat originál
nukefield_XIIIVIP3
US
07/11/2019

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........

GREAT LOOKING ADD-ONS FOR THE ENDER 3D PRINTER; JUST NEED TIME TO INSTALL.........
0

Komentáře

Ukázat originál
TeamGaviraVIP1
ES
25/06/2019

todo llego bien

todo llego bien

todo llego bien
0

Komentáře

Ukázat originál

Show:

Celkový 0 stránky

Jdi na stránku

Jít

Možná vás zajímá

recommendation for you