Hodnocení zákazníků

Napsat recenzi
  • Všechny recenze(578)
  • Snímky
  • Video(1)
  • Hvězdný
    • Hvězdný(578)
    • Hvězda 5(536)
    • Hvězda 4(39)
    • Hvězda 3(2)
    • Hvězda 2(1)
    • Hvězda 1(0)
Seřazeno podle:
Nejlepší recenze
  • Nejlepší recenze
  • Nejvíce užitečné
  • Nejnovější
Recenze pouze z vaší země (United States)
Ukázat originál

Část recenze byla přeložena automaticky.

  • 23/12/2020

    with a rpi 2b v1.1 15 fps with 5v2A psu 22 fps with9v 1.67a, this is what 700Hz can do, but it came fast and fit perfect! tft works fine with google code :) you just need upgrade sys and enable spi ;)

    Ukázat originál
  • mrkVIP4

    Both the LCD Touchscreen and the plastic case came properly packaged, but shipment took too long. The plastic case is a simple cheap solution and the screen have not been tested yet.

    Ukázat originál
  • 09/04/2021

    Wery good product. So I recommend this product..

    Ukázat originál
  • 23/02/2021

    Super case and display. Work with the Raspberry Pi 3. Delivery was ok.

    Ukázat originál
  • 13/04/2021

    good condition

    Ukázat originál
  • 25/01/2021

    sehr gut!!!!! sehr schnelle Lieferung Tadel los!

    Ukázat originál
  • 29/12/2020

    good quality

    Ukázat originál
  • 10/12/2019

    LCD board is not the same level and its bent when installed on the Raspberry Pi board. So I had to put pieces of paper to achieve the right position. Since my Raspberry Pi is version 4, I had to modify and it works. The price is reasonable when bought under promotion. Also, after I installed the driver, the touchscreen pointer is reversed.

    Komentáře (1)
    Ukázat originál
  • 12/10/2019

    First the package is in order, screen packed in bubble plastic and in a separate box. The screen is supplied with a stylus. However, the screen is not docked in the supplied housing. The screen lies therefore loose on top of the housing. Not really pretty. Another point is that there is no documentation at all. And no reference to which driver should be used. This is therefore a challenge to search the internet for driver. This is a serious disadvantage. I do not yet have the drivers and therefore have not been able to try the screen.

    Komentáře (2)
    Ukázat originál
  • 20/01/2019

    The case for the Raspberry PI B+ form factor is versatile in its design. It s is made as 3 snap together sections that offer flexible outcomes. Because the back has places for screw heads, it could attach to a wall or similar face and the RBPI board attached to it later. The LCD included in this kit fits well when as an assembled (LCD RBPI) is placed on the back cover and next the border portion of the case snapped on top. The unit is compact and work well in the sample runs done with it. The included stylist worked acceptably well to navigate the RBPI via the LCD touch input. The third case piece if snapped on closes the RBPI board inside but the LCD would not have room to be simply attached at the same time. The case and LCD are versatile items for the RBPI. Also the LCD worked in the test of placing in on the RBPI-zero-W. The PI-zero is slower but can work with the image having the screen drivers.

    Ukázat originál

    Celkový 0 stránky

    Jdi na stránku

    Možná vás zajímá

    recommendation for you
    • US$20.99
    • US$34.99
    • US$18.99
    • US$44.99
    • US$17.00
    • US$9.99
    • US$17.99
    • US$20.99
    • US$7.99
    • US$29.99
    • US$20.99
    • US$31.99
    • US$11.99
    • US$20.99
    • US$9.99
    • US$27.99
    • US$1.69
    • US$98.63