A part of the review has been auto-translated.
Bought a pair for DIY RF modules for Hubsan X4 and Skyartec Wasp Nano. Works great, thanks.
same as the original. Pins to solder. very good quality product. I recommend it
In my case it's perfect because I don't need the pins soldered, next time I'll buy 3X package. Remember, if you're not using DTR pin, when flashing you need to press reset button when arduno ide says "uploading", otherwise it won't flash.
Всё, как в описании: фото соответствует, контактов столько же, напряжение на стабилизаторе 3.3В! Светодиод питания зелёный, 13 - красный. Через UART прошивается и работает! Удобно использовать для проектов, где все периферийные устройства питаются от 3.3В и питание идёт от литиевых аккумуляторов. SD-карту подключил напрямую без модуля или делителей, GPS-модуль тоже работает.
Ottimo, di buona qualità e funzionante. Nessun problema per ora. Perfetto per l'utilizzo con il RGB LED ring.
came in good conditions
Workding fine with Arduino IDE 2.
Everything was as described. Would definitely stay again!
Good product
these are the 3.3v 8 Mhz version, which is what I wanted. 5.3v & over will damage them