Ship to United Kingdom , USD
Top Positive Review for %s on Banggood, Shop best %s with lowest price on Banggood. Browse most helpful positive review for %s before you buy., rc toys, fun sports, fashion, popular electronics
BG163339394 24/10/2022
Arrived in good condition from the US warehouse in about 7 days. The instruction is not very clear, you my have to figure things out for the screws where they go. The aileron servo was not mounted . Before you start assembly it I suggest to read the manual and watch videos online. Before you do the maiden flight check each servo with the TX on. Make sure you don't fly inverted! The battery was giving me about 5 minutes flight. The gyro is good and stable. It has enough power , also can be used as a slow flyer. TX works good . Thank you Banggood!
2
Comments (9)
Submit
  • rhe Thanksfor the insights, but I haven't found details for the aileron servo anywhere.

    Reply 08/11/2022
  • rhe Also,my aileron servo arm has 1mm holes. The linkage is 2mm wire :-( Also, having an issue with tail wagging in gyro stabilized modes. I think it's related to the rudder servo control, it appears to produce a fine range of control in "expert", but a much larger coarse range when gyro stab is used. Then it often stops at a fine offset rather than return to neutral. Strange, probably programming.

    Reply 11/11/2022
  • rhe Doyou have an issue with servo oscillations? My rudder shakes on the ground after control input changes and the also the tail is wagging in the air. Both occur with gyro stability on (non expert).

    Reply 12/11/2022
  • BG163339394 @rhe No problems with ruder oscillation.

    Reply 18/11/2022
  • BG163339394 @rhe yes I had to drill the holes at the servo arm to fit the linkage wire...

    Reply 18/11/2022
  • BG163339394 No problem with servo oscillations

    Reply 18/11/2022
  • BG163339394 @rhe i had to drill the servo arm to fit the linkage wire.

    Reply 18/11/2022
  • BG163339394 @rhe No problems with the ruder oscillations .

    Reply 18/11/2022
  • BG163339394 @rhe I had to drill the servo arm in order to fit the linkage wire.

    Reply 18/11/2022
Satisfaction Survey

Download APP to get an exclusive 10% off coupon