Customer Reviews

4.94 out of 5
See all 47 reviews
Write a Review
  • All Reviews (47)
  • Image (7)
  • Video (0)
  • All Star
    • All Star(47)
    • 5 Star(45)
    • 4 Star(1)
    • 3 Star(1)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 12/11/2020

    Arrived in just 4 days from the order, the packaging is very sturdy is ordered, there are many accessories that I did not think to find in the kit. Surprisingly I found the metal linear bearings, I thought it came with the plastic ones as in the picture.Even the plate adjustment wheels are already increased. As a first piece I printed the example file present in the USB stick with all the original settings, and I must say that I was surprised at the quality, without having made any particular adjustment, the small cube came very well. great product to start!!!

    Comments
    Show Original
  • 18/04/2021

    the delivery was very fast, the setup was quite fast. The only thing I recommend to throw directly Marlin on it as it runs great. Otherwise it's a super printer for the money.

    Comments
    Show Original
  • 04/08/2021

    Very easy to assemble and very good the printer liked very highly recommend and cheap and the delivery arrives fast liked it very much.

    Comments
    Show Original
  • 07/10/2021

    It's all right, now I'm going to ride

    Comments
    Show Original
  • 15/06/2020

    Great printer. You will have a lot to learn when you set it up. I promise you! join the face book group for Tronxy printers, you WILL need to adjust the firmware to get it to print at any speed or quality. mine came with the wrong firmware installed and the extruder ran backwards, the filament was only 1/10 extruding and the Esteps were just wrong. you can download the firmware from the tronxy web page but I suggest using the facebook page for any help you need. I'm on there every day just about. if you don't mind tinkering and a bit of head scratching, this is a good large volume core XY printer. If you want something that will be perfect out of the box, and have no intention of messing with firmware, I would get something else. it took a good 4 hours solid to build, any looks great when built. I am happy with mine, Marlin is now supported over the base firmware.

    Comments (1)
    Show Original
  • 03/06/2020

    Arrived 3 days before the scheduled date. The item is exactly as described. I found only two small imperfections of fabrication not attributable to Banggood. 1" Filament sensor hole blocked by plastic shell burrs. 2" display cable squeezed between motherboard container sheets. all easily solved by disassembling and repositioning. I state that I am at the first experience with 3D printing. the first 2 prints have not succeeded much. but after having leveled and calibrated putting a little more patience, the printer works fine and the prints are excellent.Recommended upgrade braces in the corners.

    Comments
    Show Original
  • 04/09/2020

    HELLO, I GET A ROTAL PIECE ADJUNTED PHOTO AND GREAT SEND IT TO ME ASAP. TB I WANT TO KNOW THAT IT CAN COME ON TO PLAY THE FILIAMENT WELL IN THE BASIC POSS LEAVES MANY PELOTILLAS AND IMPERFECTIONS

    Comments
    Show Original
  • bjpVIP5
    FR
    17/02/2021

    5 1 star The auto-leveling system isn't quite a bltouch, but it's interesting. it allows to precisely level the tray before printing which is perhaps better than the bltouch which will deform and adapt. Serious machine, clean printing, small community and some possible improvements. Small flaws: The non-z motors move a little when the part is retrieved which involves checking the Z before each new print. Beware of the first impressions to do the Z well and not to validate the messages of resumption of printing to the current z of the machine. I'm adding a star for after - sales service. Suite has a defect on a part, I received a replacement part of better quality than the original.

    Comments
    Show Original
  • 30/11/2020

    Definitely not a printer for a beginner. It takes the necessary knowledge and patience to get it working properly. Once it works, it is a great printer with a nice large build volume. WvE

    Comments
    Show Original
  • 13/02/2021

    whilst it took a little longer and first order did not arrive. But great communication from Banggood a second one was sent and received. thanks Banggood

    Comments
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$399.99
    • US$299.99
    • US$579.00
    • US$309.00
    • US$929.99
    • US$449.99
    • US$469.99
    • US$206.00
    • US$186.00
    • US$429.99
    • US$212.00
    • US$2.09
    • US$259.00
    • US$1.19
    • US$3.99
    • US$319.99
    • US$5.99
    • US$7.59