Customer Reviews

4.91 out of 5
See all 33 reviews
Write a Review
  • All Reviews (33)
  • Image (9)
  • Video (0)
  • All Star
    • All Star(33)
    • 5 Star(30)
    • 4 Star(3)
    • 3 Star(0)
    • 2 Star(0)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
|
Show Original

A part of the review has been auto-translated.

  • 10/11/2020

    The Tenlog Hands 2 printer is the first 3D printer I owned and I couldn't be more impressed with it. It is mainly preassembled so its super easy to get up and running. There is a little bit of a learning curve to get it leveled and adjusted perfectly for dual printing, but once it is set correctly everthing goes well. I was hoping to print ABS and that the bed temp could go above 80C. It does and I've printed some great prints in both PLA and ABS. Sometimes the prints don't stick well to the glass bed but making sure you have the right level adjustment and bed temp is critical or if that still doesn't work I found printing with a raft or painting one drop of PVA mixed with a teaspoon of water worked every time. I think its a great value for money printer and I'm really happy I chose the Hands 2. Banggood were also excellent to deal with when ordering.

    Comments
    Show Original
  • 05/12/2020

    fast shipping, and easy installation. works fine with a pretty recent version of cura (4.4) Looks like factory tuned, only had to adjust the Y axis 0.25mm.

    Comments
    Show Original
  • 12/06/2021

    super printer at a super price. After a week the printer arrived at me. The setup was done easily and quickly. The tuning of extruders 1 and 2 is a little tricky, but after that he was ready for a first test as seen in the photos. The stringing is still lush, but can be easily removed. For the first test I think I can be more than satisfied. I can definitely recommend the printer.

    Comments
    Show Original
  • 10/01/2021

    Drucker arrived quickly and undamaged. I have to say, my best 3D printer so far. Thanks to the direct extruder, TPU and TPE and other flex filaments can also be printed very well. What others write, "I can't confirm that the printing plate isn't straight. Printer is excellent to level. Slotcar with 0.1mm layer, see picture.

    Comments
    Show Original
  • 23/09/2020

    The glass could be packed in пузырчатую film.

    Comments
    Show Original
  • 11/08/2021

    arrives 3 day ahead too well printing 1 color for the moment without problem. super simple adjustment.

    Comments
    Show Original
  • 20/01/2020

    I bought it for about 40,000 yen in the campaign, but I bought this price with a dual head machine. There are 2.3 precautions. Delivery It arrived by Sagawa Express 5 days after ordering. Assembling It was almost assembled. 4 screws on the body, 4 screws on the filament set, 2 screws on the head All that's left is wiring. power cable The supplied power cable is not compatible with Japanese outlets (pictured), so you need to prepare it separately. It is a 3-pin socket used for desktop PCs. Nozzle I use a common M6 nozzle (pictured). The first one is 0.4mm. However, the nozzles on both heads were hard-tightened when they reached me. If you're not used to changing the head with other 3D printers, you can really turn it 躊躇 level. manual The included SD card contains a file containing manuals and test print patterns. All manuals are in English. Dual Color Settings You must adjust the left and right head positions. The pattern for adjusting the head is stored in the SD card with GCODE, but the position of the heat bet is wrong or it does not fix it properly. I made a test pattern myself and adjusted it while measuring it with a caliper. Cura Cura was installed with print settings. What happens when Cura upgrades...? heatbet Position adjustment is manual. I use Creality's Ender-3, but the print quality is stable and clean. I had a good shopping.

    Comments
    Show Original
  • 13/02/2020

    Nice well made printer. Impressed with electrical cable routing and tidiness of wiring.First test print ok no tweak to parameters or belt tensioning.

    Comments (1)
    Show Original
  • MARCE
    RO
    08/08/2020

    very good

    Comments
    Show Original
  • 23/11/2020

    There are relatively few IDEX printers on the market, especially at this price mark, so for what you pay, this is an excellent machine. The print quality is great, the user interface is straightforward and the printer is sturdy. However, there are some things to be aware of. Firstly, the version sold by Banggood is not the latest as described on the Tenlog website; specifically, it lacks filament runout sensors (despite this being shown on the label on the printer), & does not have the power loss recovery function. Some other things include: the extruders are modular & heavy (which limits print speed) and come with dedicated connectors and specially designed hotends, so upgrading these to something else would be difficult; the heated build plate is limited to 80oC (though you can go up to ~95oC via gcode before the firmware safety cutout kicks in) - BTW, I recommend replacing the glass bed with a magnetic PEI coated spring steel bed; upgrading the stepper drivers to TMC2208s is achievable, but you need to replace all of them and they will only work in legacy mode as there is no way to connect them up with UART control; and whilst the firmware is 'open source', the source code does not provide the UI code, so only the motherboard firmware can be edited and it is extensively modified from the base Marlin 1.0 code to suit the unique 7-axis board, so upgrading to Marlin 2.0 would be very difficult. You can retrofit the HICTOP Titan Extruder upgrades which are compatible, but at over $50 a piece, that is an expensive choice, though does reduce the weight of each extruder by around 400g. The machine is also noisy in use because even when you are only using one extruder, both hotend cooling fans come on above 80C regardless. This is an annoying design flaw and a bit of an oversight, which means is there is probably only limited benefit of the TMC2208 upgrade. Cable management could frankly be better. Tenlog customer support is responsive, but not that helpful.

    Comments (1)
    Show Original
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$429.99
    • US$579.00
    • US$259.00
    • US$729.00
    • US$499.99
    • US$299.00
    • US$86.00
    • US$459.00
    • US$261.99
    • US$419.00
    • US$269.99
    • US$179.00
    • US$399.00
    • US$229.00
    • US$149.99
    • US$199.99
    • US$459.99
    • US$189.00