Customer Reviews

4.94 out of 5
Write a Review
  • All Reviews (264)
  • Image (40)
  • Video (0)
  • All Star
    • All Star(264)
    • 5 Star(252)
    • 4 Star(9)
    • 3 Star(2)
    • 2 Star(1)
    • 1 Star(0)
Sort by:
Top Review
  • Top Review
  • Most Helpful
  • Most Recent
Reviews only from your country (United States)
  • 24/07/2020

    Matches the description

    Comments
  • 14/06/2020

    Excellent enclosure

    Comments
  • 11/01/2021

    Everything is fine as expected.

    Comments
  • 05/11/2020

    Okay

    Comments
  • 03/10/2017

    la cover si adatta perfettamente al circuito, ma bisognerebbe apportare delle modifiche alla scocca, come ho fatto. 1) inserire un terzo polo centrale per poter collegare anche il pin 2 2) inserire nel kit una femmina jack 3.5mm per poter collegare l' ingresso "F in" 3) inserire nel kit una clip per pila 9v

    Comments
  • 25/05/2016

    Купил себе конструктор тестера транзисторов на M328 с графическим дисплеем и энкодером. Долгое время искал к нему корпус. Нашел в этом магазине. Устроило по виду и цене. Цена лучше чем на Ali и Ebay, решился заказать. Покупкой очень доволен. Корпус сделан качественно, в комплекте все необходимые детали. пластик гладкий, приятный на ощупь. Без запаха. Надеюсь с этим корпусом прибор приобретет законченный вид. Доволен к покупке рекомендую. I bought a Designer tester transistors M328 with a graphical display and encoder. For a long time looking for him the body. I found in this shop. It is arranged by type and price. The price is better than Ali and Ebay, I decided to order. Purchase very satisfied. The body is made qualitatively, complete all the necessary details. plastic smooth, pleasant to the touch. Without smell. Hopefully with this housing unit will acquire a finished look. I'm happy to recommend the purchase.

    Comments
  • 05/04/2016

    This case is nice but it don’t seem to be manufactured for this component tester. It has many drawbacks. But with a little work is can work great. The first thing I noticed was there wasn’t any output for the function generator. Then the counter needed to have some strange arrangements of pin2 and 3 of the connector. Not to mention the connector is very low quality and won’t last very long with use. The two holes for the banana plugs is much larger than the plugs provided and so makes it hard to get them to line up straight on the front. That and really, it’s just an extension of 2 of the three pins on the connector so why bother? Then there is no way provided to extend the SMD test pads. All this and more really hides the quality of the component tester and its other functions. SO I first off replaced the red LED with a blue so it matches the color décor of the label. (LOL, yeah I know). Then I replaced the two banana plugs with 2 BNC and wired one to the function generator and the other to the frequency counter pins. Then I removed the junky test connector and fitted the provided zif socket. I also added 2 SMD pads so I can test simple SMD parts. Over all this works great. And might be of interest. See attached picture.

    Comments (1)
  • 16/05/2018

    Boîtier sympathique parfaitement adapté à l'appareil de test composants. Montage simple et rapide. Très satisfait. Les photos ont été faites appareil assemblé avec l'électronique.

    Comments
  • 12/02/2016

    Perfect for the job. This was not designed to accommodate the surface mount testing area of the testing PCB or the frequency counter, so I modded it and threw in a DC power jack and a switch to totally shut off the juice from the battery too. Sadly I did not prepare for the banana jacks melting, but I should have planned ahead and inserted banana plugs with heavy gauge wire to sink the heat, oh well, I am still happy.

    Comments
  • 17/08/2019

    I had fun putting this together with the main module. Note the case ships with two 7-way sockets that need to be soldered in place of the ZIF socket (then insert the ZIF into these standoffs) in order to raise the socket to the correct height to clear the case! The main kit ships with a green socket that appears to have gold-plated contacts. The case ships with a black socket but it seems to have nickel contacts, So I chose to use the green one. The rotary encoder shaft will protrude just the correct amount to accept the included knob, and the supplied nut will not be used at all. In the correct position the knob was a loose fit so I rotated it slightly before pushing it onto the shaft. There is no cutout for the LED so I drilled a 4mm hole in line with the hole for the encoder shaft (vertically), and 1mm lower than the top edge of the slot for the ZIF socket (horizontally). I did not make a hole in the self-adhesive overlay so I just see a pale red glow from the LED, but I might drill a tiny 1.5mm hole in the overlay. The 9V battery clip wires need to be passed through the battery compartment before soldering them onto the main PCB. The wires must all be within the battery compartment for the case to close.

    Comments
Show:

    Total 0 pages

    Go to page

    Go

    You might be interested in

    recommendation for you
    • US$21.99
    • US$15.99
    • US$19.99
    • US$7.99
    • US$9.99
    • US$7.99
    • US$9.99
    • US$19.99
    • US$12.99
    • US$5.99
    • US$4.99
    • US$19.99
    • US$3.98
    • US$5.99
    • US$12.99
    • US$14.99
    • US$2.99
    • US$50.99