M5Stack PSRAM 2.0 FIRE IoT Kit Dual Core ESP32 16M-FLash+4M-PSRAM Development Board MIC/BLE MPU6050+
A part of the review has been auto-translated.
First impressions with M5Stack FIRE Kit. It consist of three boards. At the top is M5Core red with ESP32 dual core MCU, SD card, TTF display, buttons, sensors, USB C port. In the middle is M5Go Base with 600mAh LiPo battery and 2x5 SK6812 RGB LEDs. At the bottom is M5Go Charger with protoboard, I2C signals and USB C charging connector. Starting 'Hello world' application was written in C++ language with Arduino IDE. Through M5stack API it writes to the TTF display using buttons to control RGB LEDs at both sides of M5Go Base board. Interface to RGB LEDs was done with the help of FastLED library.
This is the best way to make you interested in coding and easily learn the basics. The product quality and size factor is good. My only complain is that the battery stack is faulty and after even a day of charging it, once I discount the charging wire the unit dies off. The unit I received has a FUALTY BATTERY. Beside every thing is awesome. I had no experience with coding, but just after a few days playing with this I learned a lot. Shipment was fast, highly recommended.