I bought one of these to see if they where any good, it looks like they are! They are nice and small and the construction seems high quality. Came with BLHeli bootloader, meaning I could flash to BLHeli 14.1 and change all the settings via a arduino Nano and the servo lead without having to remove heatshink, etc. Tested on an unloaded high KV motor and works fine with adjustments to the settings. No word on how they perform under heavy loads but they look like they'd do as well as any other (Except xRotor 20a and FVT Little Bee, etc). So for the money these are certainly worth it providing there aren't burn out issues. I'm going to order three more and see how they perform on a quad. (Only 4 stars quality as I have yet to try more than just one.)

I bought one of these to see if they where any good, it looks like they are! They are nice and small and the construction seems high quality. Came with BLHeli bootloader, meaning I could flash to BLHeli 14.1 and change all the settings via a arduino Nano and the servo lead without having to remove heatshink, etc. Tested on an unloaded high KV motor and works fine with adjustments to the settings. No word on how they perform under heavy loads but they look like they'd do as well as any other (Except xRotor 20a and FVT Little Bee, etc). So for the money these are certainly worth it providing there aren't burn out issues. I'm going to order three more and see how they perform on a quad. (Only 4 stars quality as I have yet to try more than just one.)

I bought one of these to see if they where any good, it looks like they are! They are nice and small and the construction seems high quality. Came with BLHeli bootloader, meaning I could flash to BLHeli 14.1 and change all the settings via a arduino Nano and the servo lead without having to remove heatshink, etc. Tested on an unloaded high KV motor and works fine with adjustments to the settings. No word on how they perform under heavy loads but they look like they'd do as well as any other (Except xRotor 20a and FVT Little Bee, etc). So for the money these are certainly worth it providing there aren't burn out issues. I'm going to order three more and see how they perform on a quad. (Only 4 stars quality as I have yet to try more than just one.)

Super ESC "Damped light" funktioniert benutze den esc aber nicht zum fliegen.

Super ESC "Damped light" funktioniert benutze den esc aber nicht zum fliegen.

Super ESC "Damped light" funktioniert benutze den esc aber nicht zum fliegen.

I bought five of these, all working perfectly. I upgrade blheli with servo leads to 14.2 BS12. I testing with KINGKONG 2204 2300kv motors after i say wooow! Very very smoot run, no sync problem, with oneshoot 700hz loop, damped light. I see solering, manufacturing quality 5star. If you need good, cheap 12a esc for multi buy this!

I bought five of these, all working perfectly. I upgrade blheli with servo leads to 14.2 BS12. I testing with KINGKONG 2204 2300kv motors after i say wooow! Very very smoot run, no sync problem, with oneshoot 700hz loop, damped light. I see solering, manufacturing quality 5star. If you need good, cheap 12a esc for multi buy this!

I bought five of these, all working perfectly. I upgrade blheli with servo leads to 14.2 BS12. I testing with KINGKONG 2204 2300kv motors after i say wooow! Very very smoot run, no sync problem, with oneshoot 700hz loop, damped light. I see solering, manufacturing quality 5star. If you need good, cheap 12a esc for multi buy this!

good quality 12A esc opto, ordered as a spare, which is always good to have in.

good quality 12A esc opto, ordered as a spare, which is always good to have in.

good quality 12A esc opto, ordered as a spare, which is always good to have in.

Great ESC, make sure you have BLHELI programmer or are using passthrough on a compatible FC. So far pretty good, haven't run them to any high power yet, but so far they are good.

Great ESC, make sure you have BLHELI programmer or are using passthrough on a compatible FC. So far pretty good, haven't run them to any high power yet, but so far they are good.

Great ESC, make sure you have BLHELI programmer or are using passthrough on a compatible FC. So far pretty good, haven't run them to any high power yet, but so far they are good.

Solid and a great buy if you're getting into this hobby! Over all this is a great ESC you can program them all through your naze32 inside of BLhelli without any issues. This makes buying the little programmer not required. I was unable to get oneshot to work with them but really for me that is not a huge deal. For the price you're able to take a breath and relax, I have put around 3 hours of solid flight thus far on all 4 I have had 0 issues. They pair very nice with the KingKong 2204's.

Solid and a great buy if you're getting into this hobby! Over all this is a great ESC you can program them all through your naze32 inside of BLhelli without any issues. This makes buying the little programmer not required. I was unable to get oneshot to work with them but really for me that is not a huge deal. For the price you're able to take a breath and relax, I have put around 3 hours of solid flight thus far on all 4 I have had 0 issues. They pair very nice with the KingKong 2204's.

Solid and a great buy if you're getting into this hobby! Over all this is a great ESC you can program them all through your naze32 inside of BLhelli without any issues. This makes buying the little programmer not required. I was unable to get oneshot to work with them but really for me that is not a huge deal. For the price you're able to take a breath and relax, I have put around 3 hours of solid flight thus far on all 4 I have had 0 issues. They pair very nice with the KingKong 2204's.

I use this with deco rx703a and cc3d. oneshot125 and dampenlight. fw updated to 14.3. My previuse ecs's was emax 12a simonk with blheli and these kingkong are better.

I use this with deco rx703a and cc3d. oneshot125 and dampenlight. fw updated to 14.3. My previuse ecs's was emax 12a simonk with blheli and these kingkong are better.

I use this with deco rx703a and cc3d. oneshot125 and dampenlight. fw updated to 14.3. My previuse ecs's was emax 12a simonk with blheli and these kingkong are better.

Very nice ESC, easy to solder and good response.

Very nice ESC, easy to solder and good response.

Very nice ESC, easy to solder and good response.

Perfect for ZMR-250 frame and 2204 2300kv motor.

Perfect for ZMR-250 frame and 2204 2300kv motor.

Perfect for ZMR-250 frame and 2204 2300kv motor.

works perfectly

works perfectly

works perfectly